FM Radio - Does it have it?

I'm thinking about buying the Dubai, dual sim version of this phone. Does it have FM radio in it? My research suggests that it does not. However, I know many phones have it but it's not enabled. I'm hoping that might be the case with this phone..

carpad 3 - Can not hear audio after activating radio app

After boot of the Newsmy carpad 3 I can play and hear audio in the Music app and hear Waze's navigation directions.
Once I activate the Radio I can not hear any audio again from other source than the Radio.
Even when I close the radio app and "FORCE STOP" it, and activating again Music and Waze, there is not sound from these apps.
From now on, only the radio can be heard.
I have to reboot again and not to run Radio to play mp3 files with Music app and hear Waze's directions..
Any help, Please?
Thanks.

MOD MTC Radio apk

Hi,

I' am looking for this MTC radio app.
Who can help me with this?

Steven

Attached Thumbnails

 

Radio not working after updating to 3.38.502.12

I just updated my firmware to the newest one last night, so I could update ViperOne to 4.3. Since applying the update my Radio no longer works,, phone boots just fine, but I can't make any connection. Check phone Into and its not picking up my IMEI or by Phone number. Possibly just not reading my SIM? It was all working fine before I updated.

Phone is SOFF with latest TWRP installed.


Sent from my Nexus 7 WiFi using XDA Free mobile app

Music in car radio system

Hi
How can i listen to my mp3 music played from my Note4 on my car radio? Do i need some extra device?
Tks

radio problem?

I have a rooted S4 that was originally on MDK. I have gone through a few ROMs over the years. I recently tried CM12 (latest snapshot) and my phone/BT radios only worked about half of the time. I tried to upgrade to CM12 and the radios did not work at all. Restored backup (TWRP) of CM 12 and those radios still don't work.

What do I need to do? Flash firmware/baseband (showing GOC1 now)? I can't seem to find the right file. Hopefully its something I can flash with TWRP.

Thanks for the advice.

FM Radio Volume Too Low

Hello everyone. I'm running RussianBear rom with FlareX kernel, Xposed and Viper. I'm using FM radio almost daily, and at max volume, the audio I get from my headphones is roughly half of what I would get from the internal music player. Fooling around in Viper didn't bring any results. Is anyone else having the same issue? If so, is there a solution for this? Thanks.

FM Radio not working

Hi all,
Since I updated my LG G3 D855 euro to stock MM and rooted few days ago and my FM-Radio stop working. Anyone have any idea?

Thanks in advance

Is there any way to have the Motorola FM Radio on Cyanogenmod?

Hello, like the title says, is there any way to have Motorola FM Radio on Cyanogenmod? I tried to create a zip file with the apk inside it but when opening, it says it's not compatible.

Cm13 radio?

I've tried flashing cm13 on my s5 and each time I try to make a call or I receive a call my phone hot reboots, I'm guessing it's a radio issue? What would be the correct radio to flash for cm13?

Sent from my SM-G900F using XDA-Developers mobile app

How to flash radio file only

[Q] How to flash tab 4 7.0 sm-t231 original india stock rom's radio file only.i have full xxuoapbi latest 4.4.2 india stock rom. Want to flash the radio file only on custom rom from the full stock rom zip file i have. How to do that?.

Sent from my SM-T231 using XDA-Developers mobile app

[Q] how to flash (SM-T231) stock radio file only on custom rom

How to flash tab 4 7.0 sm-t231 original india stock roms radio file only on custom rom.i have full xxuoapbi latest 4.4.2 india stock rom. Want to flash the radio file only on custom rom from the full stock rom zip file i have. How to do that?.

Sent from my SM-T231 using XDA-Developers mobile app

Whatsapp - mobile radio active battery drain

Can't find an answer to this.

Whatsapp is the only app that's causing battery drain for me. I tried Greenify, but then I don't receive messages.

What options are there for limiting it? Battery drain is insane, all due to mobile radio active.

Radio FM in Blu pure xl

Blu pure xl have or do not have FM radio? which can enable :eek:

Guidance Undoing some radio modifications

Hi all,

I've got a Verizon Galaxy S5 that's been modified to behave like a 3G phone -- 4G/LTE is disabled and the ESN has been swapped with another phone that I have (disassembled) in my possession. I've used it this way for a year or so, but my carrier (Selectel) supports 4G now, and I am looking to undo the modification. The person who made this change for me can't be reached, and I can't remember the name of the software I need to do the job.
Can anyone point me in the right direction?
(I've rooted/flashed/etc. extensively and I program computers for a living, so actually doing this shouldn't be an issue once I have the tools, but my memory is failing me.)

Thank you.

Auxiliary Batter + Battery Isolator = No Radio Startup Delay!

Hello folks! I wanted to explain the solution I came up with to the problem of the very lengthy startups on my android car radio.

Your typical car radio is wired like you see below:



With a OEM radio, your startup is just a few seconds for a modern Linux- or android-based car radio. Even some aftermarket radios like the mainline AVH Pioneer series are up and running in seconds.

Not so much with our favorite android aftermarket car radios. Boot up times are something on the order of 20 to 30 seconds. This isn’t too bad in and of itself, but if you’re the sort of individual that likes to “get up and go” the starts getting very annoying after a while. If you’re refilling your car then start up the motor when finished, that cuts the power to the radio and you witness another 30 seconds before everything is up and running, and that’s before the stereo does its media scan and the audio apps get loaded into the RAM. So you’re almost a minute on your drive before the tunes start.

A straightforward solution is what you see below:



I’ve wired the ignition trigger line directly onto the positive. This keeps the radio on at all times. This eliminates the annoying boot up delay, however we run the risk of draining the car battery this way. I have seen discussions on this forum where standby power consumption for aftermarket android head units runs somewhere on the order of 25 mA, all the way up to 300 mA or more. I have not tested this out although it would make for an interesting study. The point is this is a potential problem if you plan to leave your vehicle parked somewhere for an extended period of time. You don’t want your car in the long term parking lot at the airport to have a dead battery when you arrive back late at night from your trip, because the android radio was running off your car battery for the days or weeks you were gone.

If you wish to eliminate the lengthy android boot up time and also save your car battery, allow me to propose the following solution:



In this example, I have purchased a battery isolator and a very small auxiliary battery just the power the car radio. This involves the addition of some extra electronics in your trunk, and some extra 4-conductor wiring from this new battery and battery isolator up to the car radio. If you know what you are doing you can do this all in one afternoon, which was my experience.

You’ll need a few things in order to get this project rolling:

A 12V 18-amp-hour battery that is typically used in an uninterruptible power supply. :
https://www.amazon.com/ExpertPower-E...dp/B00A82A3RK/

Battery isolator:
https://www.amazon.com/NOCO-IGD140HP...dp/B001DKRF2M/
or http://www.westmountainradio.com/pro...cts_id=iso_pwr
(There’s plenty of different choices here. Look around and see what you like. I chose the IsoPwr unit because it is solid-state diode-based and has no mechanical relay inside it.)

Four-conductor wire:
https://www.amazon.com/16AWG-4-Condu...dp/B0193RRUBM/

Butt splices, and splicing tool.

Fish tape, for running the wire underneath the carpet in the car.

Toolset for removing the seats, center console, removing the radio, etc.

A stiff drink for when the trolls show up. (Just kidding! :D )

I also purchased a pair of trailer wire extension cables, which are four conductor wires with plugs.
https://www.amazon.com/Hopkins-48145...dp/B0002RNSNM/
This works well for keeping the wiring in place in case I need to remove the battery or the radio.







As you can see in the pictures, I fabricated a wooden stand to retain everything, and I had a plastic battery box laying around from an earlier car stereo installation.



The procedure is simple, you place the battery and isolator in the trunk and run the wire up to the car radio. You cut the power leads on your aftermarket car wire radio harness, and splicing your four conductor wire. This wire runs all the way and hooks up to your isolator in the trunk, which in turn is connected to the auxiliary battery.



Also, an important point: LABEL YOUR WIRES!



You really don't want to mis-wire anything and screw up your car.

An optional switch on the positive line running to the radio prevents discharge of the auxiliary battery, in case you’re parked for an exceptionally long amount of time.

If it seems like a lot of running around to get around a technical limitation on the part of the radio manufacturers, it really is. This was an experimental project on my part to expand my technical prowess in to give me the android car audio experience I desired minus the tire some waiting for the radio to boot up every time I got in the vehicle.

I’ve been running this for a few days now and the result is excellent. I can restart the car after filling up at the gas station, and now there is little delay other than the OS scanning the USB and MicroSD drives. And the radio works almost from the start first thing in the morning, before I even pull out of the driveway.
If you know what you are doing it can’t be beat.

Any questions?

Oukitel K10000 radio baseband updates available?

The Oukitel K10000 uses the Mediatech MT6537P chipset.

For 3g connectivity it only accesses the frequencies: WCDMA 1900/2100MHz

Is there a way to get a new radio firmware that fully unlocks the frequencies for 3g?

I saw another phone with the MT6537P that had 850 and 1900 frequencies for 3g but I cannot find it now that I want to link to it.

Edit : found it http://pdadb.net/index.php?m=specs&i...2_huawei_titan

I saw a thread where this was done for the THL W8 Beyond with the MTK6589T chipset.

Link to other phone's thread: http://forum.xda-developers.com/show....php?t=2364473

My father-in-law has the k10000 on AT&T right now and only gets 2g on the edge network, but I heard that AT&T is dropping 2g support so I want to future proof his phone by enabling 3g on it.

Link for AT&T dropping 2g support: https://www.business.att.com/content...t-FAQ_2016.pdf

problem installing app mtc radio rom booroodook 5.1.1 lollipop .

Hello
I have a problem rigurdo the installation of a radio app mtc different from that stock . I would like to install a different mtcradio because the one in the Roma do not like. unfortunately I can not install it and do not understand why.
someone can help me ? After I download apps for 5.1.1 lollipop . ?
thank you.

Joying JY-UL135 Poor Radio Reception

Anyone else have poor radio reception with the Joying JL-UL135? Previous radios in my 2001 Suburban picked up local stations just fine. This one has a hard time picking up even local stations. I double checked my antenna connections and even bought an amplified antenna. No change. In fact, the radio reception is exactly the same weather the antenna cable is plugged into the back of the radio or not. Is it possible the radio antenna port is not connected internally to the radio?

For reference, this is my radio:
https://www.carjoying.com/android-5-...rt-revers.html

How would the radio break when you root?

I know there are ways around breaking the radio, but I'm just really curious. How would rooting break the radio? Does it have something to do with the weird encryption that comes on some Marshmallow devices now? Thanks.