hey guys tried booting remix os 3.0 on my acer aspire switch 10e booted fine but i cant seem to get audio working at all and seems like wifi is buggy as well is there anything i can do to make this more useable trying to get away from windows on this too buggy
Showing posts with label Audio. Show all posts
Showing posts with label Audio. Show all posts
Monday, 1 August 2016
Sunday, 31 July 2016
Audio issue, please help
Hello to everybody, thanks for reading.
I will start with facts: on one hand, i have my desktop pc connected via hdmi to my tv, whose analog audio output is connected to my speakers. On the other hand, i also have a Chromecast 2 connected to the tv.
So in both cases, audio output is the same, BUT sounds different (and here's the issue).
For example, when i play anything (netflix, Spotify) through my computer, sound is fine, perfect. But when i do it via Chromecast through my android phone apps, sound is definitely worse: louder and a little bit distorted, like noisier.
I guess that the difference should be on Chromecast or phone audio driver (apparently working worse than pc drivers). But i don't even know if phone's audio is relevant here or not.
What do you think? What can i do? Thanks!
I will start with facts: on one hand, i have my desktop pc connected via hdmi to my tv, whose analog audio output is connected to my speakers. On the other hand, i also have a Chromecast 2 connected to the tv.
So in both cases, audio output is the same, BUT sounds different (and here's the issue).
For example, when i play anything (netflix, Spotify) through my computer, sound is fine, perfect. But when i do it via Chromecast through my android phone apps, sound is definitely worse: louder and a little bit distorted, like noisier.
I guess that the difference should be on Chromecast or phone audio driver (apparently working worse than pc drivers). But i don't even know if phone's audio is relevant here or not.
What do you think? What can i do? Thanks!
Issue with Audio Out
HI I recently buy the car android unit. I attach the amplifier with the unit's blue wire so it turn on with unit power on. But now when i increase the volume more than 20 it just stop the audio out on all speakers. And the only way it work is turn the car off wait 1 min then power on. Can any one help me regarding this?
Call audio issue on Wind Mobile
Anyone using the OP3 on Wind notice the mic cuts out when you're in certain areas? Seems to cut out whenever the screen turns off, but works fine with the screen on or in speakerphone. I saw a few posts on reddit about the same issue. Seems to be location-based because it works in certain areas.
It's also worth noting that I went through the RMA process with Oneplus and after sending it in for repair, they sent it back saying they weren't able to reproduce the issue (was not aware it was a Wind-related issue). Would really like to get Oneplus' attention and hopefully solved via an update. Anyone know how?
It's also worth noting that I went through the RMA process with Oneplus and after sending it in for repair, they sent it back saying they weren't able to reproduce the issue (was not aware it was a Wind-related issue). Would really like to get Oneplus' attention and hopefully solved via an update. Anyone know how?
Saturday, 30 July 2016
Audio not working on CM13 nightly
Hello,
I recently flashed CM13 and everything works great except audio on calls stutters or doesn't work whatsoever as well as some white noise apps I play at night have no audio output either. Regular music apps are fine which is odd.
Any idea what's wrong? Would hate to flash back to stock. Any help would be greatly appreciated.
Sent from my ONEPLUS A3000 using Tapatalk
I recently flashed CM13 and everything works great except audio on calls stutters or doesn't work whatsoever as well as some white noise apps I play at night have no audio output either. Regular music apps are fine which is odd.
Any idea what's wrong? Would hate to flash back to stock. Any help would be greatly appreciated.
Sent from my ONEPLUS A3000 using Tapatalk
CM13 audio problem
So I just flashed the rom Resurrection Remix 5.7.1. The ringtone and the alarm seems to be played through earphones only (it was never a problem on lollipop). My phone has a problem on recognising plugged earphones (as I asked earlier). So basically no ringtone and alarms can be played now. Is this a marshmallow feature or there's a hidden setting for this in resurrection remix?:confused:
Wednesday, 27 July 2016
Need stock T-Mobile audio files for Note 5.
We picked up an AT&T Note 5 for my wife to use with T-Mobile, and it works great. She misses the T-Mobile sounds that are typically bundled with T-Mobile branded phones though, and I'm trying to find an archive with those files. I'm looking for the bundled ringtones, notifications, alarms, etc. Can anyone help?
No Audio after screen replacement
Hi,
I really need your help as I have no idea what to do.
After 1 month of using MI5 Pro Ceramic black I have broke my phone,First the touch worked and there was only vertical lines on the lcd in the spot of the shatter so I could operate but due to my stupidity and of force touching the broken glass these vertical lines started to cover all the screen (Everything worked well on the phone..Sound,Camera and etc..)
So I ordered from Aliexpress LCD + Touch screen for about 70$ (Included DHL Express shipment)
When I got the screen I started to disassamble the phone.. Got everything out,Took out the broken screen and pasted the new screen on the frame (Must say all these aliexpress screens are really bad,0% protection on the screen,Not sure about the LCD quality yet but glass is horrible..Started to scratch even before I used it)
Anyways to our point..
Started to assamble back everything.. Powered on the phone and Yay! Phone is working but...
No Sound,Firstly I checked settings and everything..Ran CIT test and everything that belongs to audio giving force close..
Calibrate Speaker PA test results : State-Get impedance failed!,Speaker Vendor-None
Vibration- FAIL no short and no long
Main mic speaker Feedback,Simulation call test,Front mic speaker feedback test,Top mic speaker feedback test,
everything when I enter it giving FC with that details :
"IlegalStateException:Unable to retrieve AudioRecord pointer for SetParameters() blablala...
Headphone mic feedback test (Called on an uninitialized AudioRecord)
So in short..
No Speaker,No Mic,No headphone Mic..
Now my question is what I need to do from now.. Its not firmware/software problem for sure as before I disassambled the phone everything worked well..
My first guess was the problem is on the Sub PCB but then I asked my self..If the USB-C is working and WiFI antenna giving full signal it means the Sub PCB works so what the hell is the problem? I really hope its not something in the PCB it self as it means throw everything to garbage.. ;<
Hope to hear suggests..
I thought to order the MI5 32GB Black version take out the Main PCB put the Pro Main PCB and put also the ceramic back cover but that I would do only if I know that the problem is from the sub PCB but if Headphone mic doesnt work (Which the Main PCB take care of) then its probably in the Main PCB??
Please help! :(
I really need your help as I have no idea what to do.
After 1 month of using MI5 Pro Ceramic black I have broke my phone,First the touch worked and there was only vertical lines on the lcd in the spot of the shatter so I could operate but due to my stupidity and of force touching the broken glass these vertical lines started to cover all the screen (Everything worked well on the phone..Sound,Camera and etc..)
So I ordered from Aliexpress LCD + Touch screen for about 70$ (Included DHL Express shipment)
When I got the screen I started to disassamble the phone.. Got everything out,Took out the broken screen and pasted the new screen on the frame (Must say all these aliexpress screens are really bad,0% protection on the screen,Not sure about the LCD quality yet but glass is horrible..Started to scratch even before I used it)
Anyways to our point..
Started to assamble back everything.. Powered on the phone and Yay! Phone is working but...
No Sound,Firstly I checked settings and everything..Ran CIT test and everything that belongs to audio giving force close..
Calibrate Speaker PA test results : State-Get impedance failed!,Speaker Vendor-None
Vibration- FAIL no short and no long
Main mic speaker Feedback,Simulation call test,Front mic speaker feedback test,Top mic speaker feedback test,
everything when I enter it giving FC with that details :
"IlegalStateException:Unable to retrieve AudioRecord pointer for SetParameters() blablala...
Headphone mic feedback test (Called on an uninitialized AudioRecord)
So in short..
No Speaker,No Mic,No headphone Mic..
Now my question is what I need to do from now.. Its not firmware/software problem for sure as before I disassambled the phone everything worked well..
My first guess was the problem is on the Sub PCB but then I asked my self..If the USB-C is working and WiFI antenna giving full signal it means the Sub PCB works so what the hell is the problem? I really hope its not something in the PCB it self as it means throw everything to garbage.. ;<
Hope to hear suggests..
I thought to order the MI5 32GB Black version take out the Main PCB put the Pro Main PCB and put also the ceramic back cover but that I would do only if I know that the problem is from the sub PCB but if Headphone mic doesnt work (Which the Main PCB take care of) then its probably in the Main PCB??
Please help! :(
Tuesday, 26 July 2016
Audio only from top speaker
Hi, I've been using a galaxy s6 but wanted to try the Nexus 6 since has stock Android and bigger screen. But... audio like You Tube, Play movies, Music, everything comes from top speaker grill, not both, I thought this phone has stereo speakers. Is it like that by default or would I have to replace the bottom speaker? Also I can't get text messages notification, always quiet no matter which sound I choose. I get phone ringtones and media but not messages tone. I'm stock right now but was doing same thing with PureNexus rom. Thanks.
carpad 3 - Can not hear audio after activating radio app
After boot of the Newsmy carpad 3 I can play and hear audio in the Music app and hear Waze's navigation directions.
Once I activate the Radio I can not hear any audio again from other source than the Radio.
Even when I close the radio app and "FORCE STOP" it, and activating again Music and Waze, there is not sound from these apps.
From now on, only the radio can be heard.
I have to reboot again and not to run Radio to play mp3 files with Music app and hear Waze's directions..
Any help, Please?
Thanks.
Once I activate the Radio I can not hear any audio again from other source than the Radio.
Even when I close the radio app and "FORCE STOP" it, and activating again Music and Waze, there is not sound from these apps.
From now on, only the radio can be heard.
I have to reboot again and not to run Radio to play mp3 files with Music app and hear Waze's directions..
Any help, Please?
Thanks.
Android 5.1 head unit >>> USB Audio (DAC) output
Hi, I installed a MTCD Android head unit with Android 5.1.1 in my car two weeks ago. (I could'nt start this thread in the MTCD section because I'm new here)
My car audio setup goes as follow: Android Head Unit >>> USB Cable >>> PCM2704 USB to SPDIF adapter >>> SPDIF coax cable >>> MiniDSP 6x8 >>> 3 Amps >>> Speakers + sub.
So far I've been able to get SPDIF sound output with Neutron (Direct USB mode), Onkyo HF Player, USB Audio Player Pro, HibyMusic Player.
Sound is amazing btw.
If I understand correctly, all these apps are working with the USB DAC because they use their own app's USB Driver.
Important to know: All song in 44khz are playing fine, songs in 48khz makes every app freeze. I got a way around this by setting Neutron to resample every song in 44khz, so all songs are working now.
Now, if I play a song in Google Play Music, Spotify, Kodi, etc no sound comes out ... same thing for my HU video app, phone calls etc.
Is there a way around this ? What modifications can be made so every sound outputs to the USB Audio ? IE. kernel update, system files modifications etc ??
Thanks for any input.
My car audio setup goes as follow: Android Head Unit >>> USB Cable >>> PCM2704 USB to SPDIF adapter >>> SPDIF coax cable >>> MiniDSP 6x8 >>> 3 Amps >>> Speakers + sub.
So far I've been able to get SPDIF sound output with Neutron (Direct USB mode), Onkyo HF Player, USB Audio Player Pro, HibyMusic Player.
Sound is amazing btw.
If I understand correctly, all these apps are working with the USB DAC because they use their own app's USB Driver.
Important to know: All song in 44khz are playing fine, songs in 48khz makes every app freeze. I got a way around this by setting Neutron to resample every song in 44khz, so all songs are working now.
Now, if I play a song in Google Play Music, Spotify, Kodi, etc no sound comes out ... same thing for my HU video app, phone calls etc.
Is there a way around this ? What modifications can be made so every sound outputs to the USB Audio ? IE. kernel update, system files modifications etc ??
Thanks for any input.
Monday, 25 July 2016
audio ac3 format not supported to my mx player
plz some body help to solve this problem.how to add ac3 audio format for mx player.my player only showing video not supporting ac3 audio format.:p:p:p:p:p:p:p
What is the best audio mod?
There's a huge amount of different options. But, I was wondering if anyone has tried most of them. I'm looking to increase the quality of the sound rather than simply boost volume. What would be best for this? Thank you in advance for the help! :)
USB DAC as main audio output
Hello,
I am making navigation system out of my android tablet, and i faced a problem that not all times i connect USB DAC, android sends audio data to USB, but rather to internal speakers (some times it does that, sometimes it does not)
Is where a simple way how to set to use USB as main audio source, and block headphones or any other audio source ?
Same apply to FM radio, i can plug headphones so it would act as antenna, but i still need audio to be rooted to USB DAC
Small support via PayPal for some one who give me the right answer :)
I am making navigation system out of my android tablet, and i faced a problem that not all times i connect USB DAC, android sends audio data to USB, but rather to internal speakers (some times it does that, sometimes it does not)
Is where a simple way how to set to use USB as main audio source, and block headphones or any other audio source ?
Same apply to FM radio, i can plug headphones so it would act as antenna, but i still need audio to be rooted to USB DAC
Small support via PayPal for some one who give me the right answer :)
Saturday, 23 July 2016
Camera & Audio mod for xperia z3
Which is the best camera and Audio mod for z3 marshmallow with xposed installed,unlocked bootloader
Friday, 22 July 2016
Audio output on android device
Hello, basically my loudspeaker is broken so i bought new one, but it takes about 3-4 week to deliver. For that time i managed to change audio output for media to earspeaker but i would like to change also alerts(notification and ringtones) to play from earspeaker. I am using app called SoundAbout and there you can set alerts only for headsets and suff like that. I wonder if there is another way to completly swap speakers or something so i can hear when sbd is calling me.
I am using Xiaomi redmi note 4g, android 5.1.1. Thanks for every suggestion :)
I am using Xiaomi redmi note 4g, android 5.1.1. Thanks for every suggestion :)
Thursday, 21 July 2016
Mi3w Broken audio software
I would like to ask a question and want to find a solution for my problem. I'm facing a quite big issue which is my loudspeaker output produced cracked sound, like a lost channel of radio and it has become worse. The logcat can be found many times (attached image). I have clean flash to miui (also used qpst many times), but ended up the same. Flashed to cm12.1 and cm13, and also the same. The problem still arise. I have already asked in miui forum but ended up nothing. I also have changed to new loudspeaker twice but still the same. Connecting to headphone doesnt have any problems, no cracking sound.
Monday, 18 July 2016
audio jack issues
Hi,
i'm having some problems with the headphone jack in my device.
the audio is very distorted in the right channel of the audio output. its a constant, shrik kind of sound..
can't figure out the cause. it feels like a contacts thing in the hardware, but i tried replacing the jack and it didn't help.
it started after flashing a custom ROM and kernel (i was already with a custom ROM, just decided to try something new) - anyone else encounterd in such issue?
thanks!
i'm having some problems with the headphone jack in my device.
the audio is very distorted in the right channel of the audio output. its a constant, shrik kind of sound..
can't figure out the cause. it feels like a contacts thing in the hardware, but i tried replacing the jack and it didn't help.
it started after flashing a custom ROM and kernel (i was already with a custom ROM, just decided to try something new) - anyone else encounterd in such issue?
thanks!
Saturday, 16 July 2016
Snapchat turning off audio
I like to watch snaps while i'm playing music over Bluetooth to my car and i wanted to know if there is a xposed module to fix it or anything thank you in advance.
Device = Galaxy S7E At&t
Device = Galaxy S7E At&t
Friday, 15 July 2016
no usb audio out since update android L
Hi all,
Since i updated my Note 10.1 tablet ( ed.2014 ) to android L, my external dac stopped working.
The usb dac is the Dragonfly 1.2 (Audioquest) and worked fine before, plug & play.
I tested the dac, the usb-otg cable and also the usb connection of the tablet => they are OK.
Hardware hasn't changed, so to me, it looks like a software problem.
Is the usb power output (more) limited ?
I used the "usb host diagnostics" app that tells me the dac is still recognised.
Is there a way to make the dac function again, or do i have to go back to the earlier version of android ?
thanks !
Jo
Since i updated my Note 10.1 tablet ( ed.2014 ) to android L, my external dac stopped working.
The usb dac is the Dragonfly 1.2 (Audioquest) and worked fine before, plug & play.
I tested the dac, the usb-otg cable and also the usb connection of the tablet => they are OK.
Hardware hasn't changed, so to me, it looks like a software problem.
Is the usb power output (more) limited ?
I used the "usb host diagnostics" app that tells me the dac is still recognised.
Is there a way to make the dac function again, or do i have to go back to the earlier version of android ?
thanks !
Jo
Subscribe to:
Posts (Atom)