TWRP Installation Problem

Weird problem in all my years of flashing to various phones....

okay I go into fastboot and I install TWRP. I'm able to boot into it ONCE and ONCE only. Once I reboot into system if I try and go back into the recovery it just loads up the stock recovery. WTF gives...???

I'll upload a video later if necessary to show what's going on....

moto e2 xposed framework installation

is there any way to install xposed framework on moto e2 ..i am unable to find a way.i tried to install using custom recovery method it failed please help me with this

App installation problem on J7 2016

Hello guys. I've tried to install some free games like Bad Piggies, Hungry Shark World, Sky Force Reloaded, Where is my water 2 etc. They are full free games. I've tried apk and the installer shows "App not installed" , I tried to install from play store it shows some kind of error after download completes.
Is anyone facing this issue? Any fix? I'm thinking maybe rooting and flashing a Custom ROM. Will that fix this?
I use Exynos version J710FN. Thanks

Any update on the 'Network Error" during installation?

Searched around everywhere and the issue seems to be relatively widespread. During the Gear VR installation process, the install button becomes greyed out, stating "Network error occurred. Try again later."

Im using a Galaxy S7 Edge (G935F) stock ROM rooted +xposed.

I've tried editing the CSC file at /system/csc/sales_code.dat but this hasn't done anything!

I'd prefer not to wipe my phone and go through the hassle but if it that works (I've heard it doesn't) then I'll give it a shot.

Any help would be greatly appreciated, thanks!

Need help | Installation

I've checked the forum and none of the solutions fixed the problem. This doesn't work either.

The error I get: Xposed is not yet compatible with android sdk 19 or your processor architecture (x86)

CANNOT LINK EXECUTABLE: cannot locate symbol "_ZM7android14AndroidRuntime5startEPKcS2_" referenced by "/data/data/de.robv.android.xposed.installer/chace/app_process"...

Asus Zenfone 5 v2.22.40.54 - Rooted Android 4.4.2

Bricked phone, failed stock rom installation

Hello guys,

I tried to install "CRISSCROSS GOES MARSHMALLOW V7.0" rom in my G925F but I forgot what my model/serial number is. All I know is that my phone is G925F (S6 edge international).
Now my phone keeps on rebooting at the Samsung logo page.
Also, I tried to install a stock rom using odin but that failed too (apparently, you can't go to an older software version)

Please help if you can.

custom rom installation, not rooted, twrp already installed

good day. may i ask if i can flash the aerom v4 even if i am not rooted.. i tried to flash the super su on my p9000 how ever it is saying that the binary is missing. as i check other thread it says that i need to install twrp 3.0.2.1. how ever i installed 3.0.0.0. i dont have laptop right now thats why i cant flash it anymore. (need to wait for 3 weeks again to go home for my laptop). i am thinking that the aerom is pre rooted. and i want to try to flash it using twrp 3.0.0.0. is it possible? thanks you so much.

NetHunter 3.0 installation error

when i try to install nethunter on my oneplus one im getting below errors

ui_print - Kernel installation completed
ui_print
@checking for Kali Chroot in installer...this can take a while...
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
minzip: Extracted file "/data/local/kalifs-full.tar.xz"
about to run program [/tmp/extractchroot.sh] with 1 args
mount: mounting /dev/block/mmcblk0p28 on /data failed: Device or resource busy
Found chroot to be installed
Extracting chroot...
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
@finished Install
script result was [1]
I:Updater process ended with RC=0
I:Legacy property environment disabled.
Updating partition details...
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram12' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram14' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram16' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram10' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram13' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram15' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram9' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram11' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram8' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram2' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop2' (Not a directory)
I:Data backup size is 1998MB, free: 53756MB.
I:sending message to remove 65537
mtppipe remove storage 65537
I:Message sent, remove storage ID: 65537
...done
I:Set page: 'flash_done'
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:operation_end - status=0
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:operation_start: 'Flashing'
Installing zip file '/usb_otg/kernel-nethunter-oneplus1-lollipop-3.1.0-20160714-1621.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
##################################################
NetHunter Kernel Installer
Kernel: NetHunter kernel
Version: 2.1
Author: Binkybear
##################################################
/sbin/getprop
Checking device compatibility...

Unpacking the installer, this may take a while...Archive: /usb_otg/kernel-nethunter-oneplus1-lollipop-3.1.0-20160714-1621.zip
inflating: env.sh
inflating: zImage
inflating: patch.d-env
inflating: boot-patcher.sh
inflating: patch.d/03-no-verity-opt-encrypt
inflating: patch.d/01-ramdisk-patch
inflating: patch.d/02-supersu
inflating: tools/lz4
inflating: tools/mkbootimg
inflating: tools/cleansystem.sh
inflating: tools/unpackbootimg
inflating: system/lib/libsupol.so
inflating: system/etc/firmware/rt2561.bin
inflating: system/etc/firmware/rt2860.bin
inflating: system/etc/firmware/htc_9271.fw
inflating: system/etc/firmware/htc_7010.fw
inflating: system/etc/firmware/rt3070.bin
inflating: system/etc/firmware/ar9170-1.fw
inflating: system/etc/firmware/carl9170-1.fw
inflating: system/etc/firmware/rt73.bin
inflating: system/etc/firmware/ar9170-2.fw
inflating: system/etc/firmware/rt2870.bin
inflating: system/etc/firmware/rtlwifi/rtl8192cufw.bin
inflating: system/etc/firmware/rtlwifi/rtl8188efw.bin
inflating: system/etc/firmware/zd1211/zd1211_uph
inflating: system/etc/firmware/zd1211/zd1211b_uphm
inflating: system/etc/firmware/zd1211/zd1211b_uph
inflating: system/etc/firmware/zd1211/zd1211_ub
inflating: system/etc/firmware/zd1211/zd1211_uphr
inflating: system/etc/firmware/zd1211/zd1211b_ub
inflating: system/etc/firmware/zd1211/zd1211_uphm
inflating: system/etc/firmware/zd1211/zd1211b_uphr
inflating: system/etc/firmware/zd1211/zd1211b_ur
inflating: system/etc/firmware/zd1211/zd1211_ur
inflating: system/xbin/hid-keyboard
inflating: system/xbin/supolicy
inflating: ramdisk-patch/init.nethunter.rc
inflating: ramdisk-patch/sbin/media_profiles.xml
inflating: ramdisk-patch/sbin/busybox_nh
inflating: ramdisk-patch/sbin/hostapd
inflating: ramdisk-patch/sbin/dvbootscript.sh
inflating: ramdisk-patch/sbin/dvmediarevert
inflating: META-INF/com/google/android/update-binary
inflating: META-INF/com/google/android/updater-script

Installing busybox applets to /sbin
Freeing some space on /system
Copying firmware to /system/etc/firmware
Copying 32-bit shared libraries to /system/lib
Installing /system/xbin binariescp: target '/system/xbin' is not a directory

Running boot image patcher...- Found boot partition at: /dev/block/mmcblk0p7
- Dumping & unpacking original boot image...
Android magic found at: 0
BOARD_KERNEL_CMDLINE console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1
BOARD_KERNEL_BASE 00000000
BOARD_NAME
BOARD_PAGE_SIZE 2048
BOARD_KERNEL_OFFSET 00008000
BOARD_RAMDISK_OFFSET 02000000
BOARD_TAGS_OFFSET 01e00000
BOARD_DT_SIZE 225280

/sbin/gzip
- Detected ramdisk compression format: gzip9966 blocks

- Running ramdisk patching scripts...
- Executing: 01-ramdisk-patch
-- Patching the ramdisk for NetHunter & init.d...
- Executing: 02-supersu-- Patching the sepolicy for SuperSU...
/tmp/nethunter/boot-patcher/patch.d/02-supersu: line 7: /system/xbin/supolicy: not found
-- Unable to patch the sepolicy, continuing...

- Executing: 03-no-verity-opt-encrypt-- Disabling dm-verity & forced encryption...
-- Found fstab: fstab.bacon

- Building new ramdisk...
- Found replacement kernel zImage!- Found replacement ramdisk image!

- Backing up original boot image to /data/local/boot-backup.img...
- Writing new boot image to memory...
Boot image patching completeI:Updater process ended with RC=0
I:Legacy property environment disabled.
Updating partition details...
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram12' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram14' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram16' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram10' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram13' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram15' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram9' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram11' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram8' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram2' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop2' (Not a directory)
I:Data backup size is 2014MB, free: 53750MB.
I:sending message to remove 65537
mtppipe remove storage 65537
I:Message sent, remove storage ID: 65537
...done
I:Set page: 'flash_done'
I:operation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'reboot'
I:Set page: 'rebootcheck'
I:Set page: 'confirm_action'
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'reboot'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'wipe'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:operation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /usb_otg/recovery.log
Copied recovery log to /usb_otg.
I:Set page: 'action_complete'
I:operation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'advanced'
I:Set page: 'filemanagerlist'
Truncating string cache entries.
Truncating string cache entries.
I:Set page: 'advanced'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:operation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /usb_otg/recovery.log
Copied recovery log to /usb_otg.
I:Set page: 'action_complete'
I:operation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'advanced'
I:Set page: 'filemanagerlist'
I:Set page: 'advanced'
I:Set page: 'filemanagerlist'
I:Set page: 'filemanageroptions'
I:Set page: 'filemanagerlist'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:operation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /usb_otg/recovery.log

Xposed Framework installation problem

Have root access (finally). When I install the framework I need via recovery I get stuck on the screen with t-mobiles logo.

Phone - SG-M982T
File - xposed-v86-sdk23-arm64
Problem - Stuck on tmobile screen

Can anyone help me?

Need help with Custom Recovery Installation!

Hi, I have been trying to install cyanogen mod for my Samsung Galaxy Mini S3 to bring it up to 6.0.0 (so I can play pokemon Go xD) and I can't seem to get any Custom Recovery to work! Whenever I boot it into recovery after installing with Odin. It just keeps restarting my phone? Any help please? Also if anyone could give me SuperSU rooting guides for my phone, instead of Kingo and King root, thanks!

Phone: Samsung Galaxy SIII Mini (I8200N)

Installation stops at 33% of step 3

I tried to install the Remix_OS_for_PC_64bit_B2016063001 but it stopped in step 3 with 33% of fulfillment.
Has anyone an idea what the problem could be?
A system information could be found in my dropbox but I'm not alloud to post it here yet...:(
Kind regards
Manfred

OTA 4.2 Installation Error on rootet Shield

Hello!

I need some Help with my Shield Tablet. I own the "Nvidia Shield 32GB LTE" Version and did root it 2 or 3 Days ago. Now i got the Message for the new "4.2 Upgrade" but after trying to install said Upgrade, i get the laying Android with an "Error". I tried the Installation 2 Times with the same Result. Do i have to Factory Reset my Shield to be able to install OTA 4.2?

I have no Experience with anything related to Software modification and got my root with a YouTube Tutorial on the Shield. :D I'd like to keep the root, and would reroot if necessary.

Any Help is appreciated!

Informations that may be helpfull:
- I have the Nvidia Family Drivers installed
- I have "minimal ADB and Fastboot "
- I own the "32GB LTE P1761" Model
- I have Android 6.0.1 installed with the Security Patch from 1. March 2016 and Shield 4.1 (24.3.67.35) Software
- I used the "TUTORIAL - Root NVIDIA SHIELD Tablet / K1 - Android 6.0" Tutorial on YouTube

Reboots between the installation of SuperSU, custom kernel, Xposed...

I am actually using this order to reinstall all the system each time a new security revision is out for my Nexus 6P.

Quote:

Flash Factory image Reboot Flash TWRP Flash SuperSU Reboot Flash custom kernel (ElementalX) Reboot Flash Xposed Install Busybox

Unfortunately, the "Android is upgrading... Optimizing app x of 193" lasts a loooooong time, and it needs to be made two times: one after I install the factory image (with no data erase), and another time when Xposed is installed.

In order to get a correct setup, I heard that, after SuperSU is installed, it needs to enter the system to do some things. And if I don't recall correctly, the kernel too. Do you think it may be possible to supress some reboot in my list, without affect something, so I can avoid the two long cache creations?

Thank you very much and kind regards.

Using Chromecast for an installation

A question for those of you with Chromecast hacking experience.

I'm thinking to use a Chromecast as a device for a physical installation, where people would connect their phones to it and control something on screen. No internet needed, just a wireless local network for people to connect to a server that handles websockets and also renders a video and does some HTML/CSS/JS stuff.

Would something like this be possible? If so, what would it entail. I'm an experienced developer, but don't have a good sense yet of the tech involved.

Installation 3.2.0 -> 3.2.1 Failed? Need help ASAP

So I am trying to install the latest 3.2.1 Update but everytime I get installation failed? I used to have root and custom emojis on the phone but I wiped the phone with TWRP by booting it, flashed stock rom and the 3.2.0 update. I then realised I had no recovery at all so I flashed the stock recovery with adb but even tho I have stock rom with no root or anything and stock recovery I still get installation failed? Could it be that I have my bootloader unlocked but still stock everything else that makes it so its not working or what? really need help with this as I wanna be able to install with OTA.

-Marcus

anyone having issues with installation of busybox

after rooting s7. and trying to install busybox
has anyone having issues with installation of busybox

TWRP installation after having rooted

Hey guys,

Recently moving back to Android with a Samsung Galaxy S7 (SM-G930F) and I have some problems to get everything working. I didn't find (or didn't managed to find) the informations I was looking for on the forum or anywhere else on internet.

Here is what I did since now:

1. Rooted my phone with CF-Auto-Root.
2. Phone rooted correctly, SuperSU installed => no problem
3. Installed TWRP Manager.
4. Launched installation of TWRP from the TWRP Manager and selected the latest version of herolte (3.0.2-2).
5. Installation failed, relaunched it, didn't get any notice of success or failed this time so I presumed it was good.
6. Restarted the phone in normal mode => No problem.
7. Restarted the phone in recovery mode => Access to TWRP asking me if I want to stay in read only or allow read/write.

> Can I boot up at this stage in read/write without causing any issues since I saw in the TWRP root installation process (http://forum.xda-developers.com/gala...rolte-t3333770)

"By swiping right, you will trigger dm-verity, and if you don't follow step 11 you will be unable to boot!
If you are going to root your device and follow the rest of these steps, then it is safe to swipe right and enable modifications."

> Since I am already rooted, it shouldn't cause any issues right?

8. I tried to do a backup of my phone but the data folder is showing no data and when performing a backup I am getting a "failed to mount /data error"

> Don't really know how to fix this error.
> I can backup without any issue Boot and System.

Thank you per advance for your answers ;)

Installation Guide To upgrade OnePlus 3 to 3.2.0

Worked for me
Check this out
http://www.androidnewsbox.com/2016/0...2-0-oneplus-3/

CM13+TWRP - Installation error, bootloop, PC doesn't recognize phone via USB

Moto G XT1032

Hello,
I hope that you understand my English. I am kind of a layman concerning Android, but still wanted to install Cyanogenmod 13. I followed these instructions (can't post them apparently since I am new). Official instructions on the CM website. (Bootloader was already unlocked because I already installed Cyanogenmod 12, went back to Stock ROM and now tried to install CM13). Like alwas there were some minor errors during the first steps, but I handled them alright, I think.
The real problem started when I tried to install the zip-file of CM13 ("Installing CyanogenMod from recovery", step 8). I followed the instructions (wipe etc.), but the installation stopped at "Patching system image unconditionally" and it said something like "missing md5-file" although the file I downloaded on the TWRP website was right next to the recovery .img.
After trying and trying I started to go through the options in TWRP recovery (which was a fault, I know) and wiped some things that probably should not have been wiped. Next error message was: "unable to mount /system". New problem.

Then I thought, I might try the recovery that was right next to the downloadlink of the CM13 firmware. Installed it succesfully and tried again some things, now I have a bootloop and can't shut off the phone. When I shut it off, 1 second later the Google-screen with the open lock appears again". The only help was to manually shut it off with recovery.
I can't even start Android anymore, which means I can't activate USB-debugging, the installation files of CM13 are missing and the main problem: my PC only recognizes the phone in fast boot mode - I can't move files to the phone, it just says in the task bar: "Fastboot falcon S".
As soon as I enter recovery mode, the USB-sign on Windows vanishes.
Tried to move the files to the devices by "adb push cm-13.0-20160703-NIGHTLY-falcon.zip /scard", but it says "* daemon not running. starting it now on port 5037 *
* daemon startet successfully *
adb: error: connect failed: no devices/emulators found"

The device is not recognized by "fastboot devices" in cmd.

I hope that you understood everything. Already tried to get help in German forums, but nobody answered there.
And yeah, I definitely stopped trying to solve it by myself because I might just destroy it more.

Thanks for your help!