Please help me i tried rooting and now my phone won't work

I tried rooting my phone using Odin from this tutorial:

https:// theunlockr(dot)com/2016/02/04/root-samsung-galaxy-s6-edge-plus/

It failed and now my phone reads "Kernel is not seandroid enforcing" and will not enter recovery mode.
I tried installing the proper firmware but when I try using that it fails and my phone then reads "SW REV CHECK FAIL DEVICE 3 BINARY 2"
This is what Odin says:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

I don't know what to do, and any help would be greatly appreciated!

Also, the firmware I used is G928TUVU2COI5_G928TTMB2COI5_TMB and my model is SM-G928T

Tried greenify app?

it force stops the selected apps.. do check this app
improves battery backup

Soft brick bootloop help! I tried everything I could think of.

Backstory I'm running PureNexus rom with Experimental kernel. Yesterday out of nowhere the phone started bootlooping, usually this is fine and i'll just restart the phone. Well after trying this the bootloop stayed for 15mins. I cleared cache and dalvik and still the same results. I ended up trying to restore a previous nandroid and nothing changed. Frustrated I backuped my titanium backups to my PC and cleared everything, factory reset and data format from twrp. I tried flashing the PureNexus rom clean and still bootloops. It just hangs on the white Google screen with the black background.

I'm following Heisenberg's tutorial (section 10) and after using fastboot and following the directions, i'm getting stuck on flashing the system. I'll get, "load_file: could not allocate 2014388768 bytes
error: cannot load 'C:\angler\images\system.img'

I read restarting the computer might help and i tried that and nothing has changed. It seems this is not rom related, since I downloaded a couple different ones and pushed it to my phone/flashed and it still bootloops. Any suggestions or help? Thanks!

Tried to flash xposed zip, stuck in bootloop

I flashed using this zip: xposed-v72-sdk21-arm.zip

And now when I start my phone its stuck at the at&t screen, please help, ima noob at this but want to use my phone...

How would i fix this?

Viper4Android tried everything.

What's up guys I usually try and search on here for all my answers and I have....I've searched every thread and tried every suggestion to get Viper4Android to work on my m9.

Just rooted my phone this week finally and it's awesome.

Installed VenomOne
TWRP recovery
Unlocked
S-off
SELinux mode to Permissive
Installed from the app store as well as zip from recovery.

I followed Sakitech's unlock/venom one video step my step as well as his s-off video. Phone works great and love this rom.

But for the life of me can't get Viper4android to load. The driver will not install.

Tried zipping the fix files from TWRP still not working the driver will not install.

Thanks ahead of time for the help

If you need any more info lemme know

Brett

Screen does not work properly after I tried to root my Galaxy S6 using Odin3

Hello, I'll get straight to the point. After I tried to root my phone the screen somehow messed up and when I try to press somewhere it on the opposite side, e.g. when I swipe to the right side, it swipes to the left side. I have tried to install a different rom, but it doesn't work. If anyone knows how to fix it please share!
Thank you for your help.

I Tried to install a custom rom but i forgot to do something

I forgot to do facory reset before I started installing a custom rom now its stuck on the screen where the blue smiely is (cyanogenmod logo) I dont know what to do its been like this for 30 minutes and i dont know what to do

N920P - Hotspot not working - All options tried

I am starting a new thread because I have tried all methods available and still I am unable to get my hotspot working.
Status: Running PC3 build stock, rooted and unlocked for my carrier(Reliance GSM) with GT. Data services are working fine after entering the APN manually.
I am unable to get the hotspot option in settings.

Attachment 3821025
Attachment 3821026
Attachment 3821027
Here are the methods which I have tried but couldnt get it working.
Method 1:
Dialed ##DATA# and used my MSL to get into the options.
However, there is no option to change APN settings.
Attachment 3821030

Method 2:
Used sql lite and dig into telephony.db.
Here also, I do not find option to edit APN.
Attachment 3821028

Method 3:
Using GT, I have tried to enable Native hotspot but it didnt worked. Also, when I go into Wifi Hotspot settings, I can enable hotspot but other devices doesnt connect and stuck on "getting Ip address".
Attachment 3821029
Attachment 3821031

I would be delighted if you all can provide your inputs on how to solve this issue.

Attached Thumbnails

 


 


 


 


 


 


 

Samsung galaxy s5 boot loop, tried everything!

Guys i am new here at xda and i am from brasil(sorry for the bad english)
I rooted my galaxy s5 g900m(android 5.0), and flashed twrp via odin, it was all ok until i tried to install the xposed framework via twrp, after i installed the zip file my phone got boot looped, i tried removing xposed trying all this: http://forum.xda-developers.com/xpos...tloop-t3055816 after not sucesiding i deleted everything by mistake( all data, cache and most important the system) then i tried to flash a new stock android 6.0 official rom via odin, but my phone is still boot looped. Can someone please help me???

Tried to install TWRP now I cannot boot into recovery

As the title says, I tried to install TWRP onto my Galaxy S5 via the app. It said that everything was successful but when I try to boot into recovery, I get stuck on a loop that says recover failed with a big caution icon saying start up failed. I can get out of the loop by using Odin and trying to install the recovery through that but it fails but I can at least turn my phone on and use it. I would like to get TWRP on my phone still but every outlet I have tried does seem to work. I could use some help here. My phone is rooted with a custom stock rom.

tried unrooting but now stuck in boot loop

I rooted my phone using odin, when i tried unrooting but it is now stuck in a boot loop. it wouldn't go into recovery mode. it tried flashing the stock using odin but it wouldn't pass. can anyone please help me

Tried to root phone but I ended up with Bootloader Exception

I tried to root my phone using this method http://forum.xda-developers.com/tmob...-edge-t3410470 but I think I failed that.
Now my phone looks like this and I can't get out of this no matter what I press.

Even if I try to hold down VOL-DOWN + POWER + HOME it gets me back to here.

I tried rooted and now I'm stuck at verizon screen

It won't boot past the verizon screen. I've tried wondershare dr phone recovery but it says i have to enable USB debugging and come to find out it doesn't even support samsung galaxy s7. SM-G930v. I have literally tried everything to my knowlege to get this thing to stop. Like pressing volume down + power and then going to wipe factory reset. Wiping cache. Everything I can think of. Is there any advice yall can give me to help me with this?

maybe there is a way i can flash something to take the verizon screen off?

Need help! Super soft Bricked stock phone. Tried many methods!

Hi all. So my stock opo somehow got bricked overnight while charging. It's completely stock and I have no idea why.

Status of my problem:
-Stuck on Android boot screen.
-Able to access fastboot.
-Can't access recovery mode
-No TRWP
-it's still locked
*USB debugging not enabled
-Cm11 33r I think...
-Installed android adb on device manager
But couldn't detect it on the list ("adb devices" cmd)
-Able to detect serial using fastboot device cmd tho.
-Tried universal adp, adb bootloader driver, Samsung adb driver, composite driver and it still won't detect it on list.
-Tried using another usb port.
-computer doesn't detect phone unless I go on fastboot or hold power+up volume for 10 sec (this shows QHUSB_BULK)
-Tried using msm9874downloadtool.exe, doesn't do anything even tho it's completed and it's green.
-Tried just flashing Cm11 33r images but it won't work cuz I'm locked.
-Tried unlocking but goes back to my other problem of device not being on the list.

Thanks for your time and effort. I really need help.

Rooted then tried to flash Tek, soft bricked now

So I have the s7 edge t-mobile, was running the PG1 and tried to put tek's rom on and when it rebooted it stayed on the samsung screen and vibrates every now and then. I can reset it and enter recovery mode and download mode, tried to wipe data and factory reset but that did nothing. Any guidance?

Tried to flash stock firmware to Moto G, stuck in bootloop

After a failed attempt to install SuperSu, bricking my Phone, I'm attempting to flash factory firmware I got from this thread here (Firmware I'm trying to flash is Bell Canada btw). I failed to root using the Windroid Toolkit, and I tried to flash using this tutorial.


After issuing adb commands to flash the files to my device, I rebooted it, only to find out that it is stuck in a loop (Shows Bootloader Unlocked warning, black screen, Bootloader unlocked warning again followed by an animation of the android mascot, with "Erasing" at the bottom of the screen, followed by a black screen, then followed by the start of what I just described").

What else should I try?

Thanks in advance.

G3 restarts constantly - Tried to fix "no os found!"

Hey guys,

i gave my mother my old LG G3 a year ago, she never had problems but suddenly she got the massage that android is updating.
She didnt know what her phone do and havent told me and now we have a disaster

The phone worked well but sometimes it restarted, booted and restarted.. Until battery was empty
so i tried to update her rom (N&N 1.3) but in the moment I started the installation the phone rebooted.. i tried to restore the backup but TWRP says "no os found!"

ofc i did a factory reset before flashing the new rom

i will now try to flash another rom.. but I have no further ideas on how to fix this issue :/

hope you guys can help us

LG G2 D802 brick problem (I tried different solutions)

Hello everyone!
I really hope I can find help here. I wanted to install Cyanogenmod 13 on my LG G2 D802 32GB. In the end I think I bricked my phone. I want to mention that I already searched for help on the Internet and tried many tutorials, but nothing helped.

First, I rooted my phone using this One click root method (before, I tried doing that other ways but it didn't work). So far, so good.

Then, I installed TWRP via Autorec. And here came the first problem. I booted into recovery mode and then the phone wouldn't start anymore. I started getting "Security error" along with Lg logo, when I wanted to turn on the phone. Actually I can't remember if I wiped everything in Recovery mode before or after getting this error, but I did anyway. Then I didn't get this security error message anymore, just stuck with lg logo.

Anyway I was still able to get into recovery or download mod, so I tried installing CM. But I couldn't acces my phone memory through PC and I didn't have CM installer zip on the phone. I tried copying CM installer into the phone using ADB push command. It did copy, it said it succesfully installed but since then every time I turn on my phone Lg logo just blinks for a fraction of a second and the phone will not turn on. The screen is black, but it remains "on" (there's nothing on it but you can see it's not totally turned off).

After that I tried every tutorial I could to install CM or stock ROM. I tried downloading different LG firmwares, including one found on a page where I had to enter my IMEI. But it's always the same problem: when I use LG Flashtool ( 1.0.54 ) it gets stuck. After clicking on System Upgrade I'm not asked about the language (as tutorials suggest), but it just opens LGMobile Support Tool, which says that my system is up to date.

OK, I think that's all I can say. So, the main problem is that I cannot use LG Flashtool, which is neccessary to install stock ROM in all the tutorials I have seen. Of course, I would like to install CM 13 still, but now th emost important thing is to get my phone to work again, even on stock system.

I hope we can solve this problem. Thank you all in advance! :)

I tried to reset my Ouya for recovery and ended up erasing everything ,Help please .

I need help deleted everything in my Ouya and now he does not start nothing, just a black screen

Has anyone tried this 20mhz unlock? Does it work?

en. miu i.com /forum.php?mod=viewthread&tid=304198

I cannot post the full link due to xda forum link prevention (i've got less then 10 posts.)
Anyway.


I saw this on the miui forums, looks very promising but I'm not flashing in until I see some more reputable people flashing it.

If someone could flash it and report back the results, that would be great.