Note 5 Air Command for every grand 2 Rom

You can get the note 5 Air command app for every grand 2 rom from here http://forum.xda-developers.com/andr...vices-t3362266 and can watch the how to get video and walkthrough here
https://www.youtube.com/watch?v=6xsH9yzLDic
Kindly comment your reviews and suggestions to keep me motivated and new ideas for making it better thanks alot :)

OEM Unlock Command Failed - "Not supported command in current status"

I recently reverted to stock so I can start from scratch and install everything over again. After all that and booting into android, I checked the ADB and OEM Unlock options in my settings. Then I rebooted into the bootloader and entered the "fastboot OEM unlock" command I followed the on-screen instructions and selected "yes" to continue. The command prompt then shows the following:


(bootloader) Unlocking bootloader...

(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 24.776s


I've googled this for about an hour and a half and can't seem to find an answer. Any help would be greatly appreciated.

Help running this command on adb?

I saw a post on reddit about sanitizing an android device but I was wondering how I could execute the command? I managed to root my device but I'm at a loss as to how to execute it. Through adb? But it doesn't seem to be a valid command.

Help is much appreciated.

The script is:

Code:

---

cd /data; for i in 0 1 2 3 4 5 6 7 8 9; do cat /dev/urandom > $i; rm $i; done

---

[help] S4 Mini GT-I9195 No recovery menu, no command, boot loop.

Hello. For the last couple of days i have tried to fix my phone. I tried to fix it with a lot of the methods seen on the forum and in other places, but none work.
My problem: When i boot up my phone it just shows the Samsung GT-I9195 screen and then goes into a boot loop. I can access the download mode, but not the recovery mode.
When i try to access the recovery mode it shows the android with a blue thing on it for a split second (like its trying to do something) and then the dead android appears with "NO COMMAND".
No recovery menu so i can clear cache and wipe data and a no matter what buttons i press nothing happens in recovery mode. Then it goes back to boot loop.

What it shows in download mode.
ODIN MODE
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CBS-CONFIG-LBS: 0x30
BOOTLOADER AP SWAEV: 2
WRITE PROTECTION: Enable

I have tried to flash a couple of firmware`s from sammobile some passed some did not but same result.
Tried to do what was suggested here: http://forum.xda-developers.com/show....php?t=2751224 nothing changed.

Now i`m stuck. If anyone know or has some ideas on how can i fix this please let me know.
Last solution is to take it to a shop.. i guess.

Stuck on DnX mode: waiting for Fastboot command

Guys i need help, my O+ Duo, dual boot tablet, is stuck in

Entering Dnx mode.
Waiting for fastboot command...

i tried unlocking by sending a command "fastboot oem unlock" but it says that the "Failed <remote:unknown command>"

please, i really need help. i don't know what to do.

"no command" after installing TWRP in recovery mode

hey guys! first post but I have been lurking here and there before registering.

Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.

unable to unlock bootloader no command working

hi guys i got some problem my xt1068's bootloader is unlockable i tried command method"oem get_unlock_data" but didn recived any string here is what happens "D:\Users\Arsalan>fastboot.exe oem get_unlock_data
...
FAILED (status read failed (Too many links))
finished. total time: 524.990s

D:\Users\Arsalan>fastboot oem unlock data
...
FAILED (status read failed (Too many links))
finished. total time: 1640.936s" what now?
and mtk droid tool is saying this "--- ERROR : do not install utils
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
" please help here

"No Command" on Unknown Android device, unable to access recovery

Hey guys,

I spent quite a bit of time trying to find a solution, but I am stuck.

I have an Android tablet. Brand and model unknown. Android version is 4.4.4. I was able to enable USB debug.. Not much of the options available when the tablet is powered on. Looks like the custom ROM is installed on it, because it comes up with some weird apps that I cannot even exit out off. This tablet was used in commercial setting as an interactive board, but was decommissioned and now I am trying to make it into a regular working Android tablet.

Using adb reboot recovery it gets me into the "No Command" screen. I cannot do anything else from there because this thing does not have volume up/down buttons, only a power button.

--wipe_data seemed to start an "erase" command, but all the random stuff is still on the tablet.

Was trying to load custom ROM through ADB, but I cannot get into a sideloader (no buttons).

Soooo, what are your thoughts guys, what can I do here? :rolleyes:

Spen and air command

Guys got the note 5 and works great but when i take out the spen there is a 5 to 10 second delay in opening air command what to do help running 6.0

Moto Z Command Center Widget

I'm attaching below the new Command Center Clock/weather Widget from the Moto Z phones.
It comes courtesy of XDA member gourabpa and was posted over on the Moto X Style (Pure) Forums
and I'm just resharing the APK here.

Enjoy :)

Attached Files

Circle Clock Widget v3.apk - [Click for QR Code] (2.27 MB)

Moto Z command center widget

http://forum.xda-developers.com/nexu...idget-t3411113



:p:D:cowboy::fingers-crossed:

NO Command screen and phone is not detected by computer

Hi all,
I use htc 626g+ dual sim android phone with 4.4.2 OS version. It is a rooted device. I updated the system with a system update and but it was not completed and was crashed and now when i switch on it turns on and ends in NO COMMAND screen in recovery and in a boot loop . then I tried factory reset using the option in recovery mode . it was completed but when I turn it again it returns to same no command screen. I read many articles in the threads and internet . should I flash a custom recovery and custom ROM because I cant do anything other than charging? I downloaded HTC SYNC MANAGER but it doesnot detect the phone.. there I cant do anything.... Please advice me... THANKS in advance

Command not allowed error

After I Upload b320 Stock rom to My Phone which I Upload it rom with bootloder key before, it took root.
When I tried to upload twrp recovery again, there was a mistake command not allowed. ı tried it two different pc and two different programme

Moto Z command center widget

Working 100% on N6. Looks great too! Enjoy! Not my work. I don't take credit for it. I found it on G+. Not responsible for ur phone blowing up lol

Attached Files

CommandCenter_v3.01.03.apk - [Click for QR Code] (2.27 MB)

Android N Preview 4 & TWRP - bad command

I downloaded and installed Preview 4 on my device.

Once it was installed I rooted and flashed TWRP. Everything was working well except TWRP. Each time I booted into Recovery, 'bad command' displayed on the screen.

Wondering if anyone else encountered this or has any suggestions for further troubleshooting.

Thanks.

[HELP] stuck on no command in android system recovery

Hi my phone is rooted and there was i notification saying system update and i tried to update it.
after that it went to recovery mode and was trying to install the update after a while it failed and it has a no command with a error triangle with a sleeping android...:crying::crying::crying:

[feature] air command full working!

Hey guys

The air command ported from N5 inside the roms is not working only shortcuts

Now i realize that is missing the apks for SmartCapture and Write on Screen

i took it of the Grace UX/N7

and now its working


Intructions:

Just flash it

make sure you dont have snote installed or the grace one (need to change the apk name inside of it, due to new changes)


link AIR PEN


Hit thanks if you liked

internal sdcard0 undetected with error: command '117 partition disk volume

Since this morning, my janice fails to mount the sdcard0 failing to download files from the browser, or pictures from whatsapp. Going in -Settings - internal memory; the sdcard0 been damaged and that to use it you must first configure / format it. Formatting does not start and a message appears: command '117 volume partition disk: 179_0 public' failed with '400 117 Command failed'

How can I fix the problem?