cant get twrp work, everything is fine, upload ok , cant reboot to recovery

Drivers installed, flashtool working, upload OK (green screen) , but when i try to reboot, (volume + and power) it is not opening recovery mod, but it reguraly start up the phone without jumping to TWRP - got 20160608 rom . Is there any other way to get root so i can install eragon rom ?. Thanks for help.

One Plus 3 Charging Issues. Is everything fine?

So. My OnePlus 3 just came but sadly the dash charging thingy came with the US style pins. As I live in Germany I can't use the charger right now till I order a european one.
So. For now. Im using a Samsung charger with 5.2 Volt and 2A .. The dash charger has 5V and 4A. Obviously the battery wont charge as fast. But will it damage it in any way? I mean. While the voltage is a bit higher the Amps are lower.

Can I use that charger?

Not connecting to 3g network but 2g works fine in my mi3w.

MANY HAVE THIS PROBLEM AS I CAME ACROSS MANY COMPLAINTS SIMILAR TO MINE DURING MY BROWSING. SOMEONE PLEASE ANSWER.
My xiaomi mi3w suddenly quit connecting to 3g network even when it is available. I tried switching to wcdma mode from settings as well as by forced method. The sim card works fine with other phones. I tried factory reset, booting back to stock version, updating, etc. During the time glitch started I was using global developer ROM miui7 . I didn't do anything unusual. I can see my imei no: from settings.. what to do? It's serious..:confused:

SD Card showing Unsupported and Unmounting automatically on Android, fine in laptop

Hi,

My Sandisk Ultra 32GB microsd card is not getting mounted on my Moto X Play from yesterday on. It was working perfectly before that.

Problem in Detail: Yesterday when i tried to play some music only I realized that its not getting mounted. I tried removing the card and reinserting it. But it's not showing up any notification. When I went to 'Storage and USB' settings suddenly after reboot, its showing 'Unsupported' for a minute and is getting unmounted automatically.

Possible Cause: One of my friend connected my phone with USB cable to his laptop day before yesterday for transferring data. I dunno exactly whether its infected or he didn't eject it properly.

What all I Tried: Initially, I tried connecting it to my laptop using Card Reader. Fortunately, everything was fine inside the system. The file system FAT32, all the data it had, and no memory was unallocated. Afterwards I did a quick format and a complete format as well, with file system FAT32. Both didn't help anyway. Then I installed mini tool partition wizard. But haven't done anything with that yet.

Kindly help me with this ASAP.

Fastboot just won't recognize my Nexus 6, ADB works fine.

I have the google usb drivers and my Nexus 6 shows up in device manager as all good and recognized
I turned on USB debugging and allow OEM unlock
ADB sees the device and works perfectly

Fastboot won't recognize there is a device connected no matter what I try, always waiting for device

Windows 10, Nexus 6 stock android 5.0, brand new device, sim unlocked, not bought from a carrier.

i want to change the board on my note 3,my current one is working fine but its not 4G

so i have note 3 SM-N900 , i wanted to change the board on it so i can have 4G internet. If i buy the board and change it will their be any issues i should be aware of? The board is like 60$, it sates that it is unlocked and Europea version, n9005 32 gb.

Phone says No Service while my other phone works fine.

I tested my sim card on both phones.
I have unlocked the bootloader on my phone.
I rooted it but then reflashed the stock firmware after getting into a bootloop.
My Wifi works fine but I cant seem to connect via mobile data.
It just says No Service.

WiFi cuts in and out when bluetooth is on, works fine when bluetooth is off

On my 6P, the flow of data on WiFi stops every few minutes, remains out for 10-30 seconds, then comes back. Usually, it will fail over to LTE data automatically. Then after 30 seconds or so, reconnects to WiFi. *THIS 100% ONLY HAPPENS WHEN BLUETOOTH IS TURNED ON. * If I turn Bluetooth off, WiFi remains on rock solid.

I don't know if it's related or not, but the only time I can get it to use WiFi for calls/sms is if I put it in airplane mode so it had no choice to use WiFi. It will never switch to or utilize WiFi calling automatically. The 3G signal in my house is nearly non existent, so it should be using WiFi in nearly all cases.

I use Pure Nexus. Updating to the latest version 2 weeks ago made no difference.

I have already been down all the roads with routers, WiFi channels, DHCP, and any other fix that could possibly be unrelated to the 6P. It's none of them. Again, this only happens with bluetooth turned on, and does not happen with bluetooth turned off.

Any suggestions? 

SD card showing as corrupted on rooted MM (works fine on non-root phone)

As mentioned in the title, the SD card is showing as "corrupted" on my phone (MM, root). If I pop it in my wife's Note 4 (official firmware, non-root), it works just fine. So, there's absolutely nothing wrong with the card and I'm assuming that root is the culprit. Has anyone noticed a similar issue? If so, have you found a solution? Going the non-root route is not an option for me. Thanks in advance.

twrp works fine but won't start via vol+power

Hi, as the title says, i can't boot to twrp when the phone is powered off. It will ignore what i push and just boot into cyanogenmod.
It used to work at some point, also i can get to twrp if i restart via the twrp app.

I should probably just reflash it?
If I'd somehow lock me from the os while experimenting, i could still run twrp via fastboot in ?

kind regards!

Display gone blank, touch and sound working fine, vibrations are fine

Hi,
It would be very kind of you if I can get some help here.

My Yu Yureka got a little wet in the rain but was working fine. A little while later when I wasn't in the rain any more I tried to use my phone. The display flickered for a minute or so before it went blank. I dried off the phone and tied restarting the device but I saw a vertical bluish strip before it went blank again. Now whatever I do, the display doesn't show a thing. I can receive calls, listen to all sorts of sounds the phone makes in general, feel the vibrations and even unlock the device while the screen is completely blank.

Could anyone suggest a solution to this? I would be very grateful.

Regards
SM

Ported CM12.1 to my MTK6580 phone, all fine except 2 issues, an easy fix for someone?

Having 2 issues trying to get this ported, 1st, the camera: Replacing no lib files from stock the new rom has no camera icon at all in the launcher as expected, replacing and copying all the system/lib/camXXX files and the rom then has the camera icon but 'camera has stopped' as soon as I open it, likewise downloading a new camera it says 'maybe the camera is open in another app'
Have replaced all things I can think off to try and get this working using various sites and pages to explain which files need copying from stock 5.1 to port 5.1. Does anyone here have a DEFINITE guide/list of things to copy or check? Incase Im missing something else?
Second 'problem' though not as bad, just annoying, memory and SD card are working fine but plugging the phone into the PC before file explorer there were 2 options inside the phone 'phone' and 'sd card' to drag files over, now they are called 'up one level' and 'down one level'
Dragging and dropping and opening all work fine, its just annoying as Its hard to work out what is the SD and what is the phone memory, again, not a massive issue just would be nice if it was working OK.

Thanks.

"kernel is not seandroid enforcing, set warranty bit:kernel" but works fine

Hello

When I turn off my device or boot up i get a message kernel is not seandroid enforcing but then it works fine. I have just installed cm13. Is this normal?

PS: I am new to this forum

Z2 red Led flashing, but phone working fine, no charging problems, no issues

My Z2 is completely fine so far but only once the OS is booted does the red LED start flashing a lot. It never did this previously, but seems to have no problem. It doesnt shut off, or have any charging issues. How can i fix it?