Hi! I just wanted to ASK, if i go to a store and want to buy this crystal clear view cover it Costa around 50 Euro. But on amazon i geht the same looking cover also said to be from samsung for just 11 Euro. Is this possible? Vor would i buy something that later doesnt work anymore?
first of all, I'm new to android Modding and I was able to flash the unofficial CM12 rom and before that I'd also taken a nandoroid backup of my stock Rom. Now I have a few questions and was wondering if someone could point me to the right direction.
So, now that I'm on twrp for new layout, will I have to go back to the old twrp in order to flash older roms such as those based on kitkat and jelly bean etc?
If I flash the old twrp now, will the Nandoroid backup (that I took earlier) on the 'twrp for new layout' work? In other words, are the backups taken from twrp with new layout are compatible with the older twrp ?
since this new cm12 seems to be a bit sluggish and I want to flash a kitkat rom while I'm on this cm12, will I have to do it from old twrp? And if so, what about going back to older layout? How is it generally done?
And lastly, I have noticed that some roms come with custom kernels. How is one supposed to find the right kernel for one's device? Is flashing a custom kernel the same as flashing roms?
I've had all these cases, and reviewed them. I'm sure many of you have already purchased a case already for your OnePlus 3, but if you haven't or are unsatisfied with what you have now, or just want an additional case, check out my reviews. Links to purchase any of the cases are in the description box of each review.
Pros • Precise cut-outs. • Feels great in the hand. • Superb button protection. • Protects protruding camera, lays flat. • Clear transparency to show off device/skins. • Great button feedback, not mushy or overly stiff.
Cons • Back can be a little slippery. • TPU protection is a bit flimsy on the bottom. • Priority mode toggle is difficult to access using right hand. • Slight rainbow effect in low light.
Features • Easy snap on case. • Shock Resistant against minor drops. • Ultra-clear - Transparent Crystal Clear Protection. • Precise cut and design; Thin and lightweight TPU case. • Dot pattern perfection- Special dotted texture design. • Camera Hole Cutout keeps your camera from scratches. • Front raised edges recess your screen to protect it when placed face down.
Specifications • Dimensions: 7 x 3.9 x 0.8 inches • Weight: 2.4 ounces
I received this case for free to do an honest review. My initial impressions are GREAT! The cutouts and holes are perfectly aligned and function properly. As you know if you own this phone the buttons are horrible! I would buy this case just for the change that it makes in pressing the buttons! Im not one on clear cases due to the scratches that can easily be seen, time will only tell. The case is a soft tpu and fells nice and the lip on the front will allow you to set the phone on its face without touching the surface, the camera is raised up as well. For less than , it is well worth it for the more tactile button feel and protection that this case offers
Anybody here using 'Clear Cover' (as in the picture attached, not to be confused with the 'Clear View Cover') for Galaxy S7(flat). I find it very difficult to remove it with the edge protection all over unlike the equivalent cover of Galaxy S6. It's so tight that the edge at the bottom left has to be removed with extreme force & care with a tool and then sliding the phone out through the left side. Makes me feel like it's one of that case that got made with the leaked dimensions of S7 pre-announcement. Not worth for . Is this just for me or anybody else experiencing it? It should be easy to snap-on and snap-out, isn't it?
I'll start off explaining my situation and then explain what myself and lots of other people seem to be confused about.
I was on Kikat last week and then upgraded to PB1 and unlocked my bootloader using method 1 by jkruse. Everything went fine and I was running stang5litre. I wanted to try Phoenix but I could not find instructions on how to get to PD1 first. I then saw that I could go right from PB1 to CM 13. I booted to recovery, wiped, installed CM and gApps, and everything went fine also.
I know my baseband is still PB1 but I'm guessing since I'm on CM now that I'm not actually on any official build right? (PD1, PF4, etc). So with that being said I don't understand how to go to other ROMs or back to LP.
I tried going back to recovery, wiping, and installing stang5litre again but my phone would not boot past the Samsung screen. Guessing something with the kernel? Soni flashed back to CM for now and I've been reading like crazy on here.
I'm trying to understand the process for switching between LP and MM. I found instructions by jkruse in the Phoenix forum (post #68) which talk about upgrading/downgrading bootloader but they are not clear and also they specifically say "Upgrade To PD1 Stock Rooted Rom With PD1 Unlocked Bootloader From 5.0 TW Rom". Well I'm not on a 5.0 TW ROM now.
I've seen countless posts in multiple forums showing a lot of other people are confused about this stuff. If I had all the details (clear instructions, file links, etc) I would glady make a very easy to follow guide and explanation of everything. I'm good at writing out stuff like that and making it very easy to understand.
Some things I want to understand so I can make a guide..
-How to go from PB1 to stock rooted PD1 (I see a guide to get to PF4 but Phoenix says you need PD1) -How to go from CM to stock rooted PD1 -How to go from CM back to stock rooted PB1 -How to go from PD1/PF4 back to stock rooted PB1 (this process might be the same as the process coming from CM?
Any help/explanation would be greatly appreciated. Some of this info might be scattered across different forums but I think a guide specifically for switching between all the builds would be a huge help to a lot of people. Please link files also. I will definitely give credit to all who help if I do get the info needed to make it!! Thanks!
I am using the simple swipe unlock method, but often that also unlocks your phone in your pocket. When it did unlock it did something and now I cannot change my screen lock type, when I open settings>lock screen>screenlock it asks for 'Confirm PIN', while I never set a PIN. I tried all the ones I would possibly have set somewhere, but it doesn't work. I read somewhere that there are other people unable to change their lock type, and the solution would be to clear credentials, however, that option is greyed out.
I deactivated and activated device administrators, I cannot encrypt and decrypt my phone, as some people suggest, because it then also asks for a PIN.
Does someone know how to tackle this problem without a factory reset?
I have been searching for a Clear / S - View Case app to change the appearance of my screen when the flip is closed.
I found this company called Kview which was reference on a few youtube videos. Their app is on Google Playstore, but a word of caution, the ads are annoying.
They have a few apps, namely:-
1. Kview locker - for non full screen flip cases (e.g. half screen / side view / quarter circle view on bottom right/etc 2. Kview Magic Mirror - for Samsung's Clear view cases, featuring full screen lock when flip is on. 3. Dot view - dot view style lock screen when flip is closed.
Apparently there is one more, but I am not sure what it is.
Here is an example link (with Iron Man lockscreen for flip covers, no longer available)
