Help with Custom Binary Blocked by FRP lock

How do i repair this custom binary blocked FRP lock?

It started when i tried to install the lucky patcher app, i accidentally turned off my OEM debugging(i think) after i rooted my phone. I think it would not be necessary for me to turn it on since i have already rooted my phone. Then after i installed the lucky patcher it say that something about booting the device then the Custom Binary Blocked by FRP lock showed up and got stuck in prompt message for samsung s6 edge+

i tried to use the root again my phone but end up stuck agian, which apparently did nothing and might trip the system of my phone. I search tons of solutions on the internet, but mostly is to flash my ROM in odin. I have downloaded the files for the firmware which is 1.8gb, and ofcourse followed the procedure to plug my device and use AP(my firmware that i just downloaded)

and this always shows up:

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9287CDXS2BPE1_G9287COLB2BPB4_G9287CDXU2BPB4_HOME. tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


now i dont know what to do, it always fails to flash my device.. im so freaked out :crying::crying:

anyone please help :(

Updating SuperSU to latest binary using flashify

Is it safe to update the SuperSU binary?

sw rev check fail device 4 binary 3 on galaxy s6

Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am gettings this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...

Can anyone help me please??:fingers-crossed:

super su binary update

i have a yureka device and i recently rooted my device sucessfully but after updating super su it shows i have to update the binary. When i update it , the phone reboots and doesnot start up and shows the cyanogen logo. Kindly help in this matter.
Also i'm unable to install camera app like moto camera in my device despite the fact i have rooted my phone. i would like to replace the current version of camera app in my phone

MI 4C bootloop after flash su binary

Whenever I'm going to flash the binary su via TWRP most updated I give wipe cache and start my cell normally it is locked in the boot screen logo and it will not come out of no way, no way I do in my root MI 4C? I'm on the latest version of the rom stable and wanted to know if you have how to flash the binary su without getting in bootloop time the flash all OK gives no error in history there's TWRP but when I start the phone it is always on the screen please help to boot


first of all I'm sorry for my English because I am using Google translator

G920F Bricked!!! Custom Binary

Hi there. I`m blocked in download mode and custom binary(recovery) blocked by r/l. I tried to flash stock with odin but odin can`t see my phone now and windows sais that usb device not recognized because devices attached has malfuntioned. Any help? What should i do? In download mode say odin mode on top.

custom binary blocked by frp lock

Got myself in a bind. Bought a new Note 5 today to upgrade to 64GB. Forgot to OEM unlock, and the phone is bricked for the moment. The new image N920TUVU3DPG1 isn't available to download yet. Any suggestions, or does anyone know where the new image can be found yet? What a rookie mistake! Smart Switch in emergency recovery tries to flash N920TUVU2DPD1 and fails. Downgrading doesn't work either.

Custom Binary Lock G928F

Hello guys,
I still have this problem since 1 month i want to pass the FRP Lock and i used to flash a new firmware and rly dont know the right way to fix that. Please leave me a comment and you opinion.
Thanks for you time :svetius::svetius:

Greetings
Brasco123

While updating a new binary everything was wiped!

So, i have root for about 2 months. Everything went fine until i got a notification that the Su binary had to be updated. So i pressed the button ton update it the normal way. After that my phone went into a boot loop. I searched up hundreds of post to see how to get out of a boot loop. But nothing worked. But when i was in the boot loop i connected my phone to my PC and copied everything to it. Then i got some hope. After my phone started with the official firmware, my phone downloaded all the apps by itself. But it didn't put my contacts back. So after that i realized that i had a NANdroid back-up. I was happy again. But unfortunately after i restored it, my pone went back in a boot loop and got stuck.:crying:. After i installed the firmware AGAIN all my apps and basically how it was before everything changed, came back. I was happier than ever before. I went to bed with a nice feeling. Than i woke up and got the message again about updating the Su binary. So now i thought nothing would happen. And this time i updated it with TWRP. But again i failed and got stuck again. I installed the firmware again for the 3rd time. After it started, i looked if i still had a NANdroid backup. And i actually had. So i restored and my phone got stuck again. So i installed the firmware again, hoping it would put everything back like the previous time. But it didn't. I searched up how to get your contacts back. My contacts weren't in my Gmail account. The Android Data Recovery program did nothing but ****. I couldn't import my contacts. Because somehow there weren't any. My last hope was my whole back-up of my phone. It took approximately 5 hours to restore. But even that didn't put my contacts back. I lost my hope. But then i saw that i had backed up my contacts with Titanium Backup. And i restored them and restarted my phone. It only restored some contacts and Skype names i didn't care about. Then my hope was officially lost. I didn't know what to do. I rooted my phone for only one reason and that was to get IOS emojis. And i even got them. I never knew that this Su binary update would totally F*UCK up my phone. Well thanks for that. And if somebody still has a clue, let me know. Because my contacts were me number 1 priority.

device 4 binary 3

Good day, thanks for reading.

Have an s6 which is blacklisted on (tmobile).
It was sold with an IMEI hack to which I have a TWRP modem and efs partition backup.
On the stock 5.1.1 I was always able to use twrp to restore those partitions and the phone would be unlocked and connect to network (metropcs).

One day it did some weird ish, it FRP locked and wouldn't work. Along the way fixing this, I upgraded to Android – Marshmallow.

All said and done my twrp partitions no longer unlock the phone due to the radio partition not restoring properly.
Now I cant go back to 5.1.1 due to SW REV CHECK FAIL DEVICE 4 BINARY 3 error using Odin and Sammobile stock roms.

From what I understand, there are locks preventing a bootloader downgrade.
Is there anything I can do at this point?

I think one way around this problem may be to have a stock TWRP backup for a G925T which I think would overwrite the boot partition and everything else and allow a total downgrade.
Would anyone possibly have something like this?

Ill appreciate any input, thanks!

how to fix recovery is not seandroid enforcing custom binary blocked by frp lock

hello all
i have stock rom j700f
just i root my device without recovery
super user need to update
i choose to update by recovery ( wrong choose )
then device just restart to samsung logo with this attention in the left upper corner
( recovery is not seandroid enforcing custom binary blocked by frp lock )
i cant do recovery
how can i fix without flash new rom
if i must flash new rom
plz give me stock and fast download to flash it via odin plz
thx all

how tofix recovery is not seandroid enforcing custom binary blocked by frp lock j700f

hello all
i have stock rom
just i root my device without recovery
super user need to update
i choose to update by recovery ( wrong choose )
then device just restart to samsung logo with this attention in the left upper corner
( recovery is not seandroid enforcing custom binary blocked by frp lock )
i cant do recovery
how can i fix without flash new rom
if i must flash new rom
plz give me stock and fast download to flash it via odin plz
thx all

Unexpected "Custom Binary blocked by FPA"

Hi everybody,

I'm in trouble since this morning.

A month ago, I rooted my S7 with ODIN following the tutorials. Everything works fine.
Yesterday, I had some crashes of the MAPS application.
This morning, I decided to restart my phone to check this trouble. Bad news.

My phone refuse to start with the message "Custom Binary blocked by FAP".
I can access to the download mode and yes, it's set on FAP block : ON !

I don't know how it's happened. The question now is : what can I do ?
Do you thing I should flash with the official ROM again or do I reset to factory directly ?

Thank's for your help.
Best regards.

Pouille

When using root access. Call the su binary is the only way?

I don't know if I expressed correctly the question. I was unsure about how to formulate it. You will understand it better with an example.

Suppose I want to edit a text that is out of the application/user scope, for example a shared_preferences file of another application. Can I create a File object pointing to the location and operate with it normally? Maybe do I need to either cp it to a staging location and load it from there or load it in memory using cat?

In other words: Issuing commands to the su shell is the only way to exploit root access?

[SM-G930W8] Custom binary blocked by FRP lock

Hi. I bought a SM-G930W8. I live in Europe but I bought the Canadian Galaxy S7 because it was half the price, bought from Italy from a street seller. It was sim locked and a friend of mine unlocked it for me. I think the firmware was ROGERS because it had rogers apps. It was rooted, it had custom recovery (TWRP). I turned off OEM unlock and after a restart it was FRP locked: "Custom binary (recovery) blocked by FRP lock." it also says "dm-verify verification failed... Need to check the DRK first...". I tried flashing G930W8VLU1APB7_G930W8OYA1APB7_BMC_FULL (Bell Mobile i don't know the source) via ODIN, no luck. I also tried G930W8VLU1APD3_G930W8OYA1APD3_RWC firmware (Rogers firmware from sammobile) with ODIN, and still no luck, and G930W8VLU1APD3_G930W8OYA1APD3_XAC (no carrier Canada from sammobile), no luck. ODIN says passed but it still remain FRP locked and "dm-verify verification failed... Need to check the DRK first...". What can I do to recover my phone to stock? I want it stock firmware from Canada without root and custom recovery. If I get this phone to a Samsung Service Centre will it be software repaired? The bootloader is locked, I can't flash things, only stock rooms but can't boot. My Galaxy S7 is bricked.

Sim is unlocked, IMEI is not blacklisted, I don't know the serial number, FRP lock is on, bootloader is locked, bootloop is present, OEM unlock turned off and "dm-verify verification failed... Need to check the DRK first..."

SuperSU binary updates

Currently, I am on a SM-G900P kltespr with a build number of aokp_kltespr_userdebug 6.0.1 MOB30M 98b7612257 test-keys. Kernel version 3.4.0-g0dfa4afbuild2@thing2#1 32-bit. I have been using Chainfires SuperSU and for the past few days I keep getting a notification concerning the binaries needing updating for SU. I've tried regular updating, and also through TWRP and for the life of me I don't know why I keep getting a failed to update message. If this is the wrong place for this issue then I do apologize. Why is the update continually failing? and what do I do to fix it?:confused:

binary rest when triangle away won't work

I have a s4 i9505 snapdragon on official rooted rom and have been trying to get back to official binary and rom status but have tyred triangle away and reflashing back to official rom with odin but having no success as fare as the binary goes I have tyred repatriation it to can any one pls help I have custom recovery Philz touch installed