mobilika

[INDEX] Moto G4 Plus Factory Firmware Images[Athene]

Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.

Moto G4 Plus Factory Firmware Images

Please report broken links. New Mirrors welcome!

WARNING: Flashing a Firmware Image is not a safe way to downgrade.

How to flash:

[GUIDE] Moto G4 Plus Newbie Thread - Restore stock firmware

XT1644 (Asian)

[6.0.1]
Retail Asia - XT1626-XT1640-XT1641_ATHENE_6.0.1_MPJ24.139-23.1_cid50_subsidy-DEFAULT_CFC.xml.zip

Frequently Asked Questions:[INDENT]Can I restore Factory Firmware if my Bootloader is locked?
Yes. However attempting to downgrade to an older version of Android may fail. Even with an unlocked Bootloader, downgrading cannot be guaranteed. It's also important to be aware that flashing the wrong Bootloader for your model can have serious consequences. Always establish your model of Moto G4 Plus before flashing.

What does 'Preflash Validation Failed' mean?
'Preflash Validation Failure' happens when the Firmware Image you are flashing is older than one you have previously flashed.

After flashing Firmware Image files phone gets stuck during boot-up | will not load Android?
Refer to the guide. Check you are naming the files correctly, and make sure you are flashing all of the 'sparsechunk' files - not just those mentioned in the tutorial. The 'sparsechunk' commands listed there are not to be copied exactly, different firmware images have different files.

Downgrading and OTA Updates
If you downgrade, it is advised to avoid all OTA Updates. These updates can result in a hard-brick (phone will not turn on) if you have a newer Bootloader than the one expected.

100% working galaxy s6 g920v reactivation bypass

Download: Apowersoft phone manager (for pc) downloaded off downloads.cnet.com

1)install software onto pc and then open it

2)turn on USB debugging while the phone is on hold the volume down,home and power buttons at the same time till phone turns off then let go as soon as it turns off it should take you to a menu that has turn on USB debugging setting go down with volume key and push menu to turn it on then it will restart

3)now you should be at the reactivation setup screen again push next and connect to a WiFi connection after connected just stay on that screen

4)now what you need to do is go to Samsung website and make a new Samsung account once finished creating account just write it down so you'll remember it

5) connect your device to pc and open APOWERSOFT PHONE MANAGER on pc as well after all that is done it should start connecting and take your device to a different screen and on the top right corner there a menu bar go ahead and push that and there should be a setting that says more tools then push that and it will take you to another screen and find where it says TRANSFER PONE and it should take you to Google play NOW search for an app called SHAKE SETTINGS download it, then open the app when done nand push the circle to turn on then shake your phone and it will take you to the system settings

6)once on system setting it won't let you deactivate the lock so what I did was I went to backup and reset go through the process and when it ask for the Samsung account info enter the one that you just made its not going to accept it but it ends up adding it to the accounts on device now go back to setting and go to accounts and it should have your new Samsung account on there now if you see it on there that's good now just keep pushing back till you end up back on the setup screen and now it should be a little different now go through the registration process and if all done right you will end up on the main menu of the phone and you've done it....

Let me know if you get stuck and I will help but this is my first time posting instructions so sorry if you do not understand maybe I will make a video or something

ZUK Z1 Vibration Intensity

I searched through all the forms of ZUK z1, but no where did I find this problem (at least for me) addressed. The vibration of the phone is too low. By default COS 12.1 on the phone doesn't have the option to change the vibrator intensity. My question is does any ROM for the phone had that feature or maybe is there any way I can use something like Kernel Auditor to do so ??

When can find my Diveces?

Hey Guys i will update my Erisin Android Car Radio,

Please First !! My English is not so good i learn every day to, i translate my from google (please forgive).

My Problem:

I have a Erisin Android Car indicates this I would like to update.
Now I saw that there MTCB and MTCD appliances. How do I know which is my device?

The original German Text

Samsung GT-P5220 CLOVERVIEW mode

Morning,

After a freeze of android my GT-P5220 Galaxy Tab has enter in cloverview mode, nothing append when trying to power on it, when pluggin it to a PC she's detected as a cloverview device.

Do you know a tool that i can use to send a new stock firmware on the device or to get the download mode working again?

Thanks in advance,
Kev

Webview with Splashscreen, Progressbar and the ability to Upload and Download

How can I create a webview app with a splashscreen, progressbar and the ability for the user to upload and download from within the app? It's for my forum https://technologx.com I just don't want my users to have to leave the app and go to the browser to upload and download.

Wifi Calling on AT&T?

Is it possible to enable wifi calling on a unlocked D6603 that has an AT&T sim inside and already downloaded the network settings?

Friday, 1 July 2016