when i upgrade my LG G3 to android M,it went dead.No boot/ led/download mode.Only shows Qualcomm HS-UDB QDLoader 9008 port 7, when connected to laptop.Itried to recover it using SmartBootDiagv1.3.1 tool,,
main problem is my phone model.A sticker where we place battery shows it is D855 made in korea but at top and and in loud speaker piece it is written as D850 0627.Still i tried this tool.. D850 model stopped at sending hello request 10 then time out
this is it. Failed to get response for Hello request.
>> failed to response for Hello & Security.
>> no response to target device.
>> failed to connect to flash bootloader.
>> AP Chip is not working normally.
For LGD851_ATMO_TMUS model only showing any progress.please see the log
>> ---------------------------- Start Logging ----------------------------
>> USB Status : Qualcomm HS-USB QDLoader 9008 (COM6)
>> Ready to access the target board...
>> BootLoader File : LGD851_ATMO_TMUS.mbn
>> 1. Model : LGD851 , 2. Suffix : ATMO , 3. Operator : TMUS
>> Bootloader : LGD851_ATMO_TMUS.mbn
>> AP Chip : MSM8974_G3 , BootLoader : LGD851_ATMO_TMUS.mbn
>> Trying Connection To Device with sahara protocol for AP Chip.
>> Successfully Connection To Device with sahara protocol for AP Chip.
>> connected with Sahara Protocol successfully.
>> Loading flash to SYS_IMEM.
>> Loading 0 Kbytes to SYS_IMEM.
>> Loading 4 Kbytes to SYS_IMEM.
>> Loading 8 Kbytes to SYS_IMEM.
>> Loading 12 Kbytes to SYS_IMEM.
>> Loading 16 Kbytes to SYS_IMEM.
>> Loading 20 Kbytes to SYS_IMEM.
>> Loading 24 Kbytes to SYS_IMEM.
>> Loading 28 Kbytes to SYS_IMEM.
>> Loading 32 Kbytes to SYS_IMEM.
>> Loading 36 Kbytes to SYS_IMEM.
>> Loading 40 Kbytes to SYS_IMEM.
>> Loading 44 Kbytes to SYS_IMEM.
>> Loading 45 Kbytes to SYS_IMEM.
>> Successfully Loaded to SYS_IMEM.(Total 45 Kbytes)
>> Flash Image was normally loaded to SYS_IMEM.
>> Checking for device status.
>> [Verifying Hello Protocol]
>> Sending Hello request 0 time(s).
>> SendSync EHOST_HELLO_RSP OK.
>> Hello Response OK.
>> Got Hello response for Hello request.
>> [Verifying Security Protocol]
>> Security Response OK.
>> Connected to flash bootloader.
1> ----------------------------------------------------------------------
>> PBL SOFTWARE HISTORY
1> ----------------------------------------------------------------------
>> 1.Smart Boot Diagnosis Tool v1.3.1 <Analysis Tool for Booting failure>
>> 2.PBL_VERSION_NUMBER [fc021834] = 1c6c6162
1> ----------------------------------------------------------------------
1> ----------------------------------------------------------------------
>> SECURE_BOOT_INFORMATION
1> ----------------------------------------------------------------------
>> [QFPROM - AP Anti-rollback Region of OEM Region ]
>> QFPROM_AP_ANTIROLLBACK_1 [0xFC4B80B8] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_2 [0xFC4B80BC] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_3 [0xFC4B80C0] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_4 [0xFC4B80C4] = 0x00000000
1> ----------------------------------------------------------------------
>> QFPROM_DEVICE_SN_1 [0xFC4B81F0] = 0x0B4F9DA7
>> QFPROM_DEVICE_SN_2 [0xFC4B81F4] = 0x8800000B
1> ----------------------------------------------------------------------
>> QFPROM_MSA_ANTIROLLBACK_1 [0xFC4B80C8] = 0x00000000
>> QFPROM_MSA_ANTIROLLBACK_2 [0xFC4B80CC] = 0x00000000
1> ----------------------------------------------------------------------
>> [QFPROM QFuse INFO]
>> QFPROM_OEM_ID_LSB [0xFC4B80F0] = 0x00310000
>> QFPROM_OEM_ID_MSB [0xFC4B80F4] = 0x00000262
>> QFPROM_SECURE_BOOT_ENABLE_LSB [0xFC4B83F8] = 0x00202020
>> QFPROM_SECURE_BOOT_ENABLE_MSB [0xFC4B83FC] = 0x00000000
>> QFPROM_JTAG_DISABLE_LSB [0xFC4B80E8] = 0x3FC000C0
>> QFPROM_JTAG_DISABLE_MSB [0xFC4B80EC] = 0x040001FE
1> ----------------------------------------------------------------------
>> JTAG_ID [0xFC4BE0E0] = 0x107B40E1
>> OEM_ID [0xFC4BE0E4] = 0x00310262
>> SERIAL_NUM_MSB [0xFC4B81F4] = 0x8800000B
>> SERIAL_NUM_LSB [0xFC4B81F0] = 0x0B4F9DA7
>> [SECURITY INFO]
>> OEM_CONFIG_ROW0_LSB_ADDR [0xFC4B80E8] = 0x3FC000C0
>> OEM_CONFIG_ROW0_MSB_ADDR [0xFC4B80EC] = 0x040001FE
>> OEM_CONFIG_ROW1_LSB_ADDR [0xFC4B80F0] = 0x00310000
>> OEM_CONFIG_ROW1_MSB_ADDR [0xFC4B80F4] = 0x00000262
>> FEAT_CONFIG_ROW0_LSB_ADDR [0xFC4B80F8] = 0x00B08010
>> FEAT_CONFIG_ROW0_MSB_ADDR [0xFC4B80FC] = 0x00000000
>> FEAT_CONFIG_ROW1_LSB_ADDR [0xFC4B8100] = 0x00000001
>> FEAT_CONFIG_ROW1_MSB_ADDR [0xFC4B8104] = 0x0004785F
1> ----------------------------------------------------------------------
>> Start Address : 0xfc102140
>> End Address : 0xfc102c80
1> ----------------------------------------------------------------------
>> PBL_APPS LOG
1> ----------------------------------------------------------------------
>> PBL_LOG_COUNT=46
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x0002fbaa
>> LOG_CODE :: 0xef0f0203 [ DECODED : 0x000f0203 ]
>> TIMESTAMP :: 0x00030277
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x000337e5
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x00034e2c
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x00035176
>> LOG_CODE :: 0xef010808 [ DECODED : 0x00010808 ]
>> TIMESTAMP :: 0x0003522b
>> LOG_CODE :: 0xef01080a [ DECODED : 0x0001080a ]
>> TIMESTAMP :: 0x000352c8
>> LOG_CODE :: 0xef0f0300 [ DECODED : 0x000f0300 ]
>> TIMESTAMP :: 0x0003532b
>> LOG_CODE :: 0xef01080c [ DECODED : 0x0001080c ]
>> TIMESTAMP :: 0x00035361
>> LOG_CODE :: 0xef5d0200 [ DECODED : 0x005d0200 ]
>> TIMESTAMP :: 0x00035427
>> LOG_CODE :: 0xef5d0406 [ DECODED : 0x005d0406 ]
>> TIMESTAMP :: 0x000d1d02
>> LOG_CODE :: 0xef5d0600 [ DECODED : 0x005d0600 ]
>> TIMESTAMP :: 0x000d589a
>> LOG_CODE :: 0xef5d0700 [ DECODED : 0x005d0700 ]
>> TIMESTAMP :: 0x000d9461
>> LOG_CODE :: 0xef0f0400 [ DECODED : 0x000f0400 ]
>> TIMESTAMP :: 0x000d94c3
>> LOG_CODE :: 0xef5d0c00 [ DECODED : 0x005d0c00 ]
>> TIMESTAMP :: 0x000d9a52
>> LOG_CODE :: 0xef5d0a00 [ DECODED : 0x005d0a00 ]
>> TIMESTAMP :: 0x000d9b42
>> LOG_CODE :: 0xef5d1000 [ DECODED : 0x005d1000 ]
>> TIMESTAMP :: 0x000dea42
>> LOG_CODE :: 0xef5d1301 [ DECODED : 0x005d1301 ]
>> TIMESTAMP :: 0x000eb851
>> LOG_CODE :: 0xef5d1500 [ DECODED : 0x005d1500 ]
>> TIMESTAMP :: 0x000eb886
>> LOG_CODE :: 0xef5d1600 [ DECODED : 0x005d1600 ]
>> TIMESTAMP :: 0x000eb8d6
>> LOG_CODE :: 0xef01080e [ DECODED : 0x0001080e ]
>> TIMESTAMP :: 0x000f134e
>> LOG_CODE :: 0xef1d0300 [ DECODED : 0x001d0300 ]
>> TIMESTAMP :: 0x000f1415
>> LOG_CODE :: 0xef010810 [ DECODED : 0x00010810 ]
>> TIMESTAMP :: 0x0014c34c
>> LOG_CODE :: 0xef0f0500 [ DECODED : 0x000f0500 ]
>> TIMESTAMP :: 0x0014c462
>> LOG_CODE :: 0xef0b000f [ DECODED : 0x000b000f ]
>> TIMESTAMP :: 0x00151494
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x001519a6
>> LOG_CODE :: 0xef010801 [ DECODED : 0x00010801 ]
>> TIMESTAMP :: 0x00151a73
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x0015327c
>> LOG_CODE :: 0xef010803 [ DECODED : 0x00010803 ]
>> TIMESTAMP :: 0x001532c1
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x00153629
>> LOG_CODE :: 0xef010805 [ DECODED : 0x00010805 ]
>> TIMESTAMP :: 0x0015365b
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x00153701
>> LOG_CODE :: 0xef010807 [ DECODED : 0x00010807 ]
>> TIMESTAMP :: 0x00153736
>> LOG_CODE :: 0xef5d0201 [ DECODED : 0x005d0201 ]
>> TIMESTAMP :: 0x00153828
>> LOG_CODE :: 0xef010604 [ DECODED : 0x00010604 ]
>> TIMESTAMP :: 0x0016c9d1
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x0016cedf
>> LOG_CODE :: 0xef010801 [ DECODED : 0x00010801 ]
>> TIMESTAMP :: 0x0016cfac
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x0016e78e
>> LOG_CODE :: 0xef010803 [ DECODED : 0x00010803 ]
>> TIMESTAMP :: 0x0016e7e2
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x0016eb2e
>> LOG_CODE :: 0xef010805 [ DECODED : 0x00010805 ]
>> TIMESTAMP :: 0x0016eb60
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x0016ebff
>> LOG_CODE :: 0xef010807 [ DECODED : 0x00010807 ]
>> TIMESTAMP :: 0x0016ec34
>> LOG_CODE :: 0xef0f0600 [ DECODED : 0x000f0600 ]
>> TIMESTAMP :: 0x001823af
>> LOG_CODE :: 0xef0f0500 [ DECODED : 0x000f0500 ]
>> TIMESTAMP :: 0x180b7fb0
>> LOG_CODE :: 0xefa00502 [ DECODED : 0x00a00502 ]
>> TIMESTAMP :: 0x180e3b53
1> ----------------------------------------------------------------------
>> < PBL DUMP LOG >
1> ----------------------------------------------------------------------
>> 1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_FUSE_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_FAST_BOOT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDCC_LOG_DETECT_PORT_ACCESS_ERR
1> PBL_SDC_LOG_DEFAULT
1> PBL_SDCC_LOG_GOT_RCA_ERR
1> PBL_SDCC_LOG_GOT_CSD_ERR
1> PBL_FUSE_SDCC_MCLK_BOOT_FREQ
1> PBL_SDCC_LOG_READ_DATA_ERR
1> PBL_SDCC_LOG_DATA_TRANSFER_MODE_ERR
1> PBL_SDCC_LOG_DETECT_GPT_ERR
1> PBL_SDC_LOG_DEFAULT
1> PBL_SDCC_LOG_GPT_IS_PRIMARY_ERR
1> PBL_SDCC_LOG_GPT_GOT_SBL_ENTRY_ERR
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_LOADER_LOG_IMG_HDR
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_AP_SW_REV
1> [PBL_LOG_SECBOOT] SECBOOT INVALID MSM HW ID
1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDC_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_USB_ENUM_TIMEOUT
1> PBL_FUSE_AP_SW_REV
1> PBL_AUTHENTICATION_LOG_DEFAULT
>> Logged Time : 2016-08-01 18:48:41...successfully Completed.
>> Saved Log File(LOG_LGD851_ATMO_TMUS_20160801_184841.txt) successfully.
I also used BoardDiag_v2.99a and BoardDiag3.99c tool (run in admn. mode-driver signing off).Used extracted tot's of D850 and D851 .Still no success.it shows no response from device check PMIC first and if problem not corrected replace AP chip or some times it shows "Device was not found in dload trying flash programmer". .Only smartboot tool showing some response
What to do next?????Please advice. Pls help to recover my G3.Thanks in advance
main problem is my phone model.A sticker where we place battery shows it is D855 made in korea but at top and and in loud speaker piece it is written as D850 0627.Still i tried this tool.. D850 model stopped at sending hello request 10 then time out
this is it. Failed to get response for Hello request.
>> failed to response for Hello & Security.
>> no response to target device.
>> failed to connect to flash bootloader.
>> AP Chip is not working normally.
For LGD851_ATMO_TMUS model only showing any progress.please see the log
>> ---------------------------- Start Logging ----------------------------
>> USB Status : Qualcomm HS-USB QDLoader 9008 (COM6)
>> Ready to access the target board...
>> BootLoader File : LGD851_ATMO_TMUS.mbn
>> 1. Model : LGD851 , 2. Suffix : ATMO , 3. Operator : TMUS
>> Bootloader : LGD851_ATMO_TMUS.mbn
>> AP Chip : MSM8974_G3 , BootLoader : LGD851_ATMO_TMUS.mbn
>> Trying Connection To Device with sahara protocol for AP Chip.
>> Successfully Connection To Device with sahara protocol for AP Chip.
>> connected with Sahara Protocol successfully.
>> Loading flash to SYS_IMEM.
>> Loading 0 Kbytes to SYS_IMEM.
>> Loading 4 Kbytes to SYS_IMEM.
>> Loading 8 Kbytes to SYS_IMEM.
>> Loading 12 Kbytes to SYS_IMEM.
>> Loading 16 Kbytes to SYS_IMEM.
>> Loading 20 Kbytes to SYS_IMEM.
>> Loading 24 Kbytes to SYS_IMEM.
>> Loading 28 Kbytes to SYS_IMEM.
>> Loading 32 Kbytes to SYS_IMEM.
>> Loading 36 Kbytes to SYS_IMEM.
>> Loading 40 Kbytes to SYS_IMEM.
>> Loading 44 Kbytes to SYS_IMEM.
>> Loading 45 Kbytes to SYS_IMEM.
>> Successfully Loaded to SYS_IMEM.(Total 45 Kbytes)
>> Flash Image was normally loaded to SYS_IMEM.
>> Checking for device status.
>> [Verifying Hello Protocol]
>> Sending Hello request 0 time(s).
>> SendSync EHOST_HELLO_RSP OK.
>> Hello Response OK.
>> Got Hello response for Hello request.
>> [Verifying Security Protocol]
>> Security Response OK.
>> Connected to flash bootloader.
1> ----------------------------------------------------------------------
>> PBL SOFTWARE HISTORY
1> ----------------------------------------------------------------------
>> 1.Smart Boot Diagnosis Tool v1.3.1 <Analysis Tool for Booting failure>
>> 2.PBL_VERSION_NUMBER [fc021834] = 1c6c6162
1> ----------------------------------------------------------------------
1> ----------------------------------------------------------------------
>> SECURE_BOOT_INFORMATION
1> ----------------------------------------------------------------------
>> [QFPROM - AP Anti-rollback Region of OEM Region ]
>> QFPROM_AP_ANTIROLLBACK_1 [0xFC4B80B8] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_2 [0xFC4B80BC] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_3 [0xFC4B80C0] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_4 [0xFC4B80C4] = 0x00000000
1> ----------------------------------------------------------------------
>> QFPROM_DEVICE_SN_1 [0xFC4B81F0] = 0x0B4F9DA7
>> QFPROM_DEVICE_SN_2 [0xFC4B81F4] = 0x8800000B
1> ----------------------------------------------------------------------
>> QFPROM_MSA_ANTIROLLBACK_1 [0xFC4B80C8] = 0x00000000
>> QFPROM_MSA_ANTIROLLBACK_2 [0xFC4B80CC] = 0x00000000
1> ----------------------------------------------------------------------
>> [QFPROM QFuse INFO]
>> QFPROM_OEM_ID_LSB [0xFC4B80F0] = 0x00310000
>> QFPROM_OEM_ID_MSB [0xFC4B80F4] = 0x00000262
>> QFPROM_SECURE_BOOT_ENABLE_LSB [0xFC4B83F8] = 0x00202020
>> QFPROM_SECURE_BOOT_ENABLE_MSB [0xFC4B83FC] = 0x00000000
>> QFPROM_JTAG_DISABLE_LSB [0xFC4B80E8] = 0x3FC000C0
>> QFPROM_JTAG_DISABLE_MSB [0xFC4B80EC] = 0x040001FE
1> ----------------------------------------------------------------------
>> JTAG_ID [0xFC4BE0E0] = 0x107B40E1
>> OEM_ID [0xFC4BE0E4] = 0x00310262
>> SERIAL_NUM_MSB [0xFC4B81F4] = 0x8800000B
>> SERIAL_NUM_LSB [0xFC4B81F0] = 0x0B4F9DA7
>> [SECURITY INFO]
>> OEM_CONFIG_ROW0_LSB_ADDR [0xFC4B80E8] = 0x3FC000C0
>> OEM_CONFIG_ROW0_MSB_ADDR [0xFC4B80EC] = 0x040001FE
>> OEM_CONFIG_ROW1_LSB_ADDR [0xFC4B80F0] = 0x00310000
>> OEM_CONFIG_ROW1_MSB_ADDR [0xFC4B80F4] = 0x00000262
>> FEAT_CONFIG_ROW0_LSB_ADDR [0xFC4B80F8] = 0x00B08010
>> FEAT_CONFIG_ROW0_MSB_ADDR [0xFC4B80FC] = 0x00000000
>> FEAT_CONFIG_ROW1_LSB_ADDR [0xFC4B8100] = 0x00000001
>> FEAT_CONFIG_ROW1_MSB_ADDR [0xFC4B8104] = 0x0004785F
1> ----------------------------------------------------------------------
>> Start Address : 0xfc102140
>> End Address : 0xfc102c80
1> ----------------------------------------------------------------------
>> PBL_APPS LOG
1> ----------------------------------------------------------------------
>> PBL_LOG_COUNT=46
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x0002fbaa
>> LOG_CODE :: 0xef0f0203 [ DECODED : 0x000f0203 ]
>> TIMESTAMP :: 0x00030277
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x000337e5
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x00034e2c
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x00035176
>> LOG_CODE :: 0xef010808 [ DECODED : 0x00010808 ]
>> TIMESTAMP :: 0x0003522b
>> LOG_CODE :: 0xef01080a [ DECODED : 0x0001080a ]
>> TIMESTAMP :: 0x000352c8
>> LOG_CODE :: 0xef0f0300 [ DECODED : 0x000f0300 ]
>> TIMESTAMP :: 0x0003532b
>> LOG_CODE :: 0xef01080c [ DECODED : 0x0001080c ]
>> TIMESTAMP :: 0x00035361
>> LOG_CODE :: 0xef5d0200 [ DECODED : 0x005d0200 ]
>> TIMESTAMP :: 0x00035427
>> LOG_CODE :: 0xef5d0406 [ DECODED : 0x005d0406 ]
>> TIMESTAMP :: 0x000d1d02
>> LOG_CODE :: 0xef5d0600 [ DECODED : 0x005d0600 ]
>> TIMESTAMP :: 0x000d589a
>> LOG_CODE :: 0xef5d0700 [ DECODED : 0x005d0700 ]
>> TIMESTAMP :: 0x000d9461
>> LOG_CODE :: 0xef0f0400 [ DECODED : 0x000f0400 ]
>> TIMESTAMP :: 0x000d94c3
>> LOG_CODE :: 0xef5d0c00 [ DECODED : 0x005d0c00 ]
>> TIMESTAMP :: 0x000d9a52
>> LOG_CODE :: 0xef5d0a00 [ DECODED : 0x005d0a00 ]
>> TIMESTAMP :: 0x000d9b42
>> LOG_CODE :: 0xef5d1000 [ DECODED : 0x005d1000 ]
>> TIMESTAMP :: 0x000dea42
>> LOG_CODE :: 0xef5d1301 [ DECODED : 0x005d1301 ]
>> TIMESTAMP :: 0x000eb851
>> LOG_CODE :: 0xef5d1500 [ DECODED : 0x005d1500 ]
>> TIMESTAMP :: 0x000eb886
>> LOG_CODE :: 0xef5d1600 [ DECODED : 0x005d1600 ]
>> TIMESTAMP :: 0x000eb8d6
>> LOG_CODE :: 0xef01080e [ DECODED : 0x0001080e ]
>> TIMESTAMP :: 0x000f134e
>> LOG_CODE :: 0xef1d0300 [ DECODED : 0x001d0300 ]
>> TIMESTAMP :: 0x000f1415
>> LOG_CODE :: 0xef010810 [ DECODED : 0x00010810 ]
>> TIMESTAMP :: 0x0014c34c
>> LOG_CODE :: 0xef0f0500 [ DECODED : 0x000f0500 ]
>> TIMESTAMP :: 0x0014c462
>> LOG_CODE :: 0xef0b000f [ DECODED : 0x000b000f ]
>> TIMESTAMP :: 0x00151494
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x001519a6
>> LOG_CODE :: 0xef010801 [ DECODED : 0x00010801 ]
>> TIMESTAMP :: 0x00151a73
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x0015327c
>> LOG_CODE :: 0xef010803 [ DECODED : 0x00010803 ]
>> TIMESTAMP :: 0x001532c1
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x00153629
>> LOG_CODE :: 0xef010805 [ DECODED : 0x00010805 ]
>> TIMESTAMP :: 0x0015365b
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x00153701
>> LOG_CODE :: 0xef010807 [ DECODED : 0x00010807 ]
>> TIMESTAMP :: 0x00153736
>> LOG_CODE :: 0xef5d0201 [ DECODED : 0x005d0201 ]
>> TIMESTAMP :: 0x00153828
>> LOG_CODE :: 0xef010604 [ DECODED : 0x00010604 ]
>> TIMESTAMP :: 0x0016c9d1
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x0016cedf
>> LOG_CODE :: 0xef010801 [ DECODED : 0x00010801 ]
>> TIMESTAMP :: 0x0016cfac
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x0016e78e
>> LOG_CODE :: 0xef010803 [ DECODED : 0x00010803 ]
>> TIMESTAMP :: 0x0016e7e2
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x0016eb2e
>> LOG_CODE :: 0xef010805 [ DECODED : 0x00010805 ]
>> TIMESTAMP :: 0x0016eb60
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x0016ebff
>> LOG_CODE :: 0xef010807 [ DECODED : 0x00010807 ]
>> TIMESTAMP :: 0x0016ec34
>> LOG_CODE :: 0xef0f0600 [ DECODED : 0x000f0600 ]
>> TIMESTAMP :: 0x001823af
>> LOG_CODE :: 0xef0f0500 [ DECODED : 0x000f0500 ]
>> TIMESTAMP :: 0x180b7fb0
>> LOG_CODE :: 0xefa00502 [ DECODED : 0x00a00502 ]
>> TIMESTAMP :: 0x180e3b53
1> ----------------------------------------------------------------------
>> < PBL DUMP LOG >
1> ----------------------------------------------------------------------
>> 1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_FUSE_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_FAST_BOOT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDCC_LOG_DETECT_PORT_ACCESS_ERR
1> PBL_SDC_LOG_DEFAULT
1> PBL_SDCC_LOG_GOT_RCA_ERR
1> PBL_SDCC_LOG_GOT_CSD_ERR
1> PBL_FUSE_SDCC_MCLK_BOOT_FREQ
1> PBL_SDCC_LOG_READ_DATA_ERR
1> PBL_SDCC_LOG_DATA_TRANSFER_MODE_ERR
1> PBL_SDCC_LOG_DETECT_GPT_ERR
1> PBL_SDC_LOG_DEFAULT
1> PBL_SDCC_LOG_GPT_IS_PRIMARY_ERR
1> PBL_SDCC_LOG_GPT_GOT_SBL_ENTRY_ERR
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_LOADER_LOG_IMG_HDR
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_AP_SW_REV
1> [PBL_LOG_SECBOOT] SECBOOT INVALID MSM HW ID
1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDC_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_USB_ENUM_TIMEOUT
1> PBL_FUSE_AP_SW_REV
1> PBL_AUTHENTICATION_LOG_DEFAULT
>> Logged Time : 2016-08-01 18:48:41...successfully Completed.
>> Saved Log File(LOG_LGD851_ATMO_TMUS_20160801_184841.txt) successfully.
I also used BoardDiag_v2.99a and BoardDiag3.99c tool (run in admn. mode-driver signing off).Used extracted tot's of D850 and D851 .Still no success.it shows no response from device check PMIC first and if problem not corrected replace AP chip or some times it shows "Device was not found in dload trying flash programmer". .Only smartboot tool showing some response
What to do next?????Please advice. Pls help to recover my G3.Thanks in advance
No comments:
Post a Comment