Resurrection ROM Skype speakerphone issue

Hi, sorry, I can't post in the Resurrection ROM's thread because I don't have enough posts.

Tried on latest stable and unstable Resurrection ROMs (0714), and skype mic does not work when in speakerphone mode. Here are the logs during the switch:

I'm not sure if this is the real reason, but according to the logs, it looks like skype is trying to access "speaker-mic" input, which in turn tries to access ACDB device id 11, which does not exist in audio_platform_info.xml file.

Code:

---

07-15 18:00:27.433  653  1533 D audio_hw_primary: out_set_parameters: enter: usecase(0: deep-buffer-playback) kvpairs: routing=2
07-15 18:00:27.442  653  1532 D audio_hw_primary: out_set_parameters: enter: usecase(12: audio-ull-playback) kvpairs: routing=2
07-15 18:00:27.563  653  1530 D audio_hw_primary: out_set_parameters: enter: usecase(1: low-latency-playback) kvpairs: routing=2
07-15 18:00:27.564  653  1530 D audio_hw_primary: select_devices: out_snd_device(0: ) in_snd_device(52: speaker-mic)
07-15 18:00:27.564  653  1530 D audio_hw_primary: disable_audio_route: reset and update mixer path: low-latency-record
07-15 18:00:27.585  653  1530 D hardware_info: hw_info_append_hw_type : device_name = handset-mic
07-15 18:00:27.585  653  1530 D audio_hw_primary: disable_snd_device: snd_device(43: handset-mic)
07-15 18:00:27.591  653  1530 D hardware_info: hw_info_append_hw_type : device_name = speaker-mic
07-15 18:00:27.591  653  1530 D audio_hw_primary: enable_snd_device: snd_device(52: speaker-mic)
07-15 18:00:27.597  653  1530 I audio_hw_utils: audio_extn_utils_send_app_type_cfg CAPTURE app_type 69938, acdb_dev_id 11, sample_rate 48000
07-15 18:00:27.598  653  1530 D ACDB-LOADER: ACDB -> send_audio_cal, acdb_id = 11, path = 1, app id = 0x11132, sample rate = 48000
07-15 18:00:27.598  653  1530 D        : Failed to fetch the lookup information of the device 0000000B
07-15 18:00:27.598  653  1530 D ACDB-LOADER: ACDB -> AUDIO_SET_VOL_CAL cal type = 12
07-15 18:00:27.598  653  1530 D ACDB-LOADER: ACDB -> audstrm_cal->cal_type.cal_data.cal_size = 16
07-15 18:00:27.598  653  1530 D ACDB-LOADER: ACDB -> GET_AFE_TOPOLOGY_ID for adcd_id 11, Topology Id 112fb
07-15 18:00:27.598  653  1530 D        : Failed to fetch the lookup information of the device 0000000B
07-15 18:00:27.598  653  1530 D ACDB-LOADER: ACDB -> send_hw_delay : acdb_id = 11 path = 1
07-15 18:00:27.598  653  1530 D audio_hw_primary: enable_audio_route: apply mixer and update path: low-latency-record
07-15 18:00:27.611  653  1530 D audio_hw_primary: select_devices: done
07-15 18:00:27.611  653  1530 D audio_hw_primary: select_devices: out_snd_device(2: speaker) in_snd_device(0: )
07-15 18:00:27.612  653  1530 D audio_hw_primary: disable_audio_route: reset and update mixer path: low-latency-playback
07-15 18:00:27.649  653  1530 D hardware_info: hw_info_append_hw_type : device_name = handset
07-15 18:00:27.649  653  1530 D audio_hw_primary: disable_snd_device: snd_device(1: handset)
07-15 18:00:27.653  653  1530 D aud_dev_arbi: releaseOneDevice: not sending command, device argument (1) does not match any registered device
07-15 18:00:27.653  653  1530 D aud_dev_arbi: releaseOneDevice: device 1 owner is 0
07-15 18:00:27.653  653  1530 I msm8974_platform: platform_check_and_set_codec_backend_cfg: Usecase bitwidth 16, samplerate 48000
07-15 18:00:27.653  653  1530 I msm8974_platform: platform_check_and_set_codec_backend_cfg: new_snd_devices[0] is 2
07-15 18:00:27.653  653  1530 I msm8974_platform: platform_check_codec_backend_cfg Codec selected backend: 0 current bit width: 16 and sample rate: 48000
07-15 18:00:27.653  653  1530 W msm8974_platform: platform_check_codec_backend_cfg:Use default bw and sr for voice/voip calls
07-15 18:00:27.653  653  1530 D msm8974_platform: platform_check_codec_backend_cfg: resetting sample_rate back to default, backend_idx: 0
07-15 18:00:27.653  653  1530 I msm8974_platform: platform_check_codec_backend_cfg Codec selected backend: 0 updated bit width: 16 and sample rate: 48000
07-15 18:00:27.653  653  1530 D hardware_info: hw_info_append_hw_type : device_name = speaker
07-15 18:00:27.654  653  1530 D audio_hw_primary: enable_snd_device: snd_device(2: speaker)
07-15 18:00:27.654  653  1530 D aud_dev_arbi: acquireOneDevice: device owner for device 2 is 1
07-15 18:00:27.660  653  1530 I audio_hw_primary: select_devices Selected apptype: 69937
07-15 18:00:27.661  653  1530 I audio_hw_utils: audio_extn_utils_send_app_type_cfg PLAYBACK app_type 69937, acdb_dev_id 15, sample_rate 48000
07-15 18:00:27.661  653  1530 D ACDB-LOADER: ACDB -> send_audio_cal, acdb_id = 15, path = 0, app id = 0x11131, sample rate = 48000
07-15 18:00:27.661  653  1530 D ACDB-LOADER: ACDB -> AUDIO_SET_VOL_CAL cal type = 12
07-15 18:00:27.661  653  1530 D ACDB-LOADER: ACDB -> audstrm_cal->cal_type.cal_data.cal_size = 16
07-15 18:00:27.661  653  1530 D ACDB-LOADER: ACDB -> GET_AFE_TOPOLOGY_ID for adcd_id 15, Topology Id 1025e
07-15 18:00:27.661  653  1530 D ACDB-LOADER: ACDB -> send_hw_delay : acdb_id = 15 path = 0
07-15 18:00:27.661  653  1530 D audio_hw_primary: enable_audio_route: apply mixer and update path: low-latency-playback quat_i2s
07-15 18:00:27.701  653  1530 D audio_hw_primary: select_devices: done
07-15 18:00:27.702  653  1530 D audio_hw_extn: audio_extn_set_anc_parameters: anc_enabled:0
07-15 18:00:27.705  653  1530 D ACDB-LOADER: ACDB -> AUDIO_SET_VOL_CAL cal type = 40
07-15 18:00:27.705  653  1530 W msm8974_platform: platform_send_gain_dep_cal: Usecase list is empty
07-15 18:00:27.709  653  8510 D audio_hw_primary: in_set_parameters: enter: kvpairs=input_source=7;routing=-2147483520
07-15 18:00:27.730  653  1530 D AudioFlinger: mixer(0xf23c0000) throttle end: throttle time(2)
07-15 18:00:28.079  3146  3501 D HeadsetStateMachine: Disconnected process message: 10, size: 0

---

Any help would be greatly appreciated.