Hello Everyone. This is my first post on XDA-Developers, and I want to share my experience on how I transferred my Huawei G750-U10 to Android 4.4.2. For the people not interested in my experience, and are only here for the explanation, scroll down to the tutorial part.
Story part (my experience)
First off, I did some research on how to root the phone, because you will need a rooted phone to install other firmware and custom ROMS. Rooting is essentially unlocking an account on your phone that has access to all the files and programs so that you can have more control over your phone (it is normally disabled for security reasons). Rooting the phone was easy. I used a program called RootGenius, which is just a 1 click-root program. Very handy and easy. After this, the hard part started.
Fyi, the only reason that I started this project is because I wanted to play Pokémon GO w/o buying a new device :p
From this step I did a full backup of my current ROM and NVRAM and wrote down my IMEI numbers (the G750 has 2 IMEI numbers because it has 2 SIM-Card slots). These numbers are unique for your phone and are used for calling and sending SMS messages. So make sure you write them down (in my phone they were also written down under the battery). The program I used to backup the NVRAM and the IMEI numbers is MTKDroidTools.
After this step, I tried unlocking my bootloader. But it was very stubborn (I was using the latest firmware from Huawei, B119) and I tried doing this with fastboot. Which failed every single time and gave a 0x7000 error when I tried to unlock the bootloader. But I have to say that my bootloader was acting weird from the start anyway. Whenever I used the command:
It always showed that the bootloader was unlocked, eventhough after I locked it using the command:
Which is weird. So I will just include a tutorial on how to unlock the bootloader just in case yours works normal.
So, after realising that my bootloader was not working correctly, and I could not install any recovery mod like CWM or TWRP (or any custom ROM for that matter), I found out that I needed to flash to the chip directly. This was also a huge challange, since i've never done this before and I actually did not know what I was doing. I've changed ROMS on phones a couple of times before, but that always was with a unlocked bootloader and so via the "normal" recovery system way.
For this part, I used XDA user: jacktackles' post a lot. He had some handy information about flashing to the chipset immediately and on what files to use. Since my B119 firmware was locked, I first wanted firmware with an unlocked bootloader. So I flashed some Chinese G750 firmware, that changed my device from a G750-U10 to a G750-T00. The flashing process was not flawless at all, and was the part that took me the most time (10+ hours). This all because I forgot to untick 1 simple box... Oh well, I guess that is how it works (at least I got it to work :D). So, after flashing this Chinese firmware, the hardest part was done. And I had access to TWRP Recovery. With this I installed the custom ROM that I wanted, and that is where my adventure ended.
So, to summarize: It is not easy, and not beginner friendly. That is why I wanted to make this post: To make it easier for you guys to do the same and get to catch YOUR Pokémon! (Or just to upgrade to 4.4.2). So let's now go to the tutorial part!
Tutorial part
I did this with a Windows 10 64-bit computer, although I would recommend using Windows 7. You will also need a usb-cable to connect your phone to your computer. Make sure that everytime you install a new ROM that you re-enable USB-debugging. You do this by going to your phone options > About Phone > Click "build number" 7 times > Go back to options > Developers options and tick the USB-Debugging tickbox.
Sorry for not uploading screenshots, but XDA prevents me from using any outside links because I'm a new user (so i'll try to be as precise as possible). This means that also any downloadable files should be retrieved from jacktackles' post (again big thanks to him!). His forum post can be found here: http://forum.xda-developers.com/andr...4-4-2-t3038166.
So, go to his post and download the VCOM drivers, MKT Droid Tools, B113 4.2.2 base with unlocked bootloader, Root Genius, and this ROM from another XDA-Developer: http://forum.xda-developers.com/show...9#post62356379 (Thanks a lot mate! Awesome upload). The Gaaps link is not needed with my method, and the last link is down. So you will need to get a replacement ROM for that. I used one from NeedRom. Just go to their site, and search for G750-U10 and download a ROM that you want (which is Android 4.4.2 of course). Or download another rom from any other site. The one I used is called: G750-U10 KitKat which was listed on the site on: 07/22/2015 11:35 pm. But you can also choose to download another ROM.
So to sum up, we got 3 ROMS:
1. The Chinese Firmware downgrade to B113
(FILENAME: G750-U10 V100R001C00B113CUSTC432D001_Firmware_Slovakia_Aust ria_Lithuania_Czech Republic_Latvia_Estonia_Greece_05021NHU)
2. The ROM from pavel22 to change the device to G750-T00
(FILENAME: G750-T00_mod8_265_FlashTool)
3. The ROM that we finally are after
(FILENAME: Huawei G750 U10 Kit Kat 4.9.16)
(In my case of course, not if you downloaded another "final" ROM)
Okay, so after all the files are downloaded and extracted (except for the 3rd ROM), we can start!
1. Rooting
This step is very simple and quick. Plug in your phone to your PC and open Root Genius. Click the big button and your phone should be rooted. If it gives an error, just try again and again until it works. After this restart your phone, and a new app "RootKing" should be installed. If not, the phone is not rooted.
2. MTK Droid Tools (backing up NVRam & IMEI)
Extract MTK Droid Tools from it's ZIP file, and place it in a folder. Now extract the VCOM drivers and install them. These drivers make MTK Droid Tools recognize your device. After installing the drivers, open up the .exe file from MTK and make sure it recognizes your device. If it does not, reboot your PC and try again. After your device is recognized, install the "adbd insecure" app on your device, from the playstore (or download it somewhere else if you do not want to pay). But trust me, it is worth the money. Once adbd is installed, tick both boxes on the app, so that we can connect to your phone with MTK. If done correctly, MTK Droid Tools should now be able to fully get access to your device, and a green box will appear in the left bottom of the program.
Now, backup your NVRam and IMEI. You do this by clicking on the "IMEI/NVRAM" button, and clicking backup. To be safe and for ease of access, write down your IMEI's on a paper or notepad file. Now the real fun starts!
3. Flashing the Chinese Firmware
In the Chinese firmware folder, there will be 4 sub-folders: SD_Upgrade, Update Tool, USB_DRV, USB_Upgrade.
0. Delete the SD_Upgrade folder (Not needed).
1. Go to USB_DRV and install the .exe file in the: "Driver For servers 2012-11-27" rar file.
2. After this open the Update Tool folder and extract files.
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests :P)
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file.
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
4. Flashing the: "G750-U10 to G750-T00" Firmware
This will be almost the same as part 3.
Extract the "G750-T00_mod8_265_FlashTool" rar file, and:
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests :P)
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file (make sure that you select the scatter file from the new rar file, and that you are not using the same one as before).
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
5. Restoring your NVRam and IMEI
You might need to root your device again, check if need be, by searching for an app called SuperSU or RootKing. If they are not present, root the device again with Root Genius.
You will need to re-install the "adbd" app on your new ROM. If there is no Play Store present, search for a Play Store APK on Google. Once, installed check the 2 tickboxes and re-open MTK Droid Tools.
Click on the "IMEI/NVRAM" button restore your backed-up NVRAM and retype you IMEI codes. Once the restores are done, restart the phone and check if you can call someone. If it works, good job! You can now progress to the very last step! If not, check if you entered the IMEI correct. You probably made a Typo.
6. Installing final ROM
Now that you have installed pavel22's ROM, you have access to a recovery system. So copy the whole 3rd zip file to the root folder of you device. Turn off your device, and turn it on again but this time while holding both volume buttons and the power button until TWRP opens. Click on install, search your zip file and swipe right. When it finishes, do a factory reset from TWRP and then reboot the system normally. You should now have a fully working G750-U10 with Android 4.4.2. Congratulations!
This was my tutorial and personal experience with converting my G750-U10 to Android 4.4.2. It has been a wild ride, and i've reached points that I wanted to throw my device against the wall. I'm now very happy with my (feeling like) new device. I can now finally catch 'em all and become the best PokéMaster ever!
~ NeusAap.
Story part (my experience)
First off, I did some research on how to root the phone, because you will need a rooted phone to install other firmware and custom ROMS. Rooting is essentially unlocking an account on your phone that has access to all the files and programs so that you can have more control over your phone (it is normally disabled for security reasons). Rooting the phone was easy. I used a program called RootGenius, which is just a 1 click-root program. Very handy and easy. After this, the hard part started.
Fyi, the only reason that I started this project is because I wanted to play Pokémon GO w/o buying a new device :p
From this step I did a full backup of my current ROM and NVRAM and wrote down my IMEI numbers (the G750 has 2 IMEI numbers because it has 2 SIM-Card slots). These numbers are unique for your phone and are used for calling and sending SMS messages. So make sure you write them down (in my phone they were also written down under the battery). The program I used to backup the NVRAM and the IMEI numbers is MTKDroidTools.
After this step, I tried unlocking my bootloader. But it was very stubborn (I was using the latest firmware from Huawei, B119) and I tried doing this with fastboot. Which failed every single time and gave a 0x7000 error when I tried to unlock the bootloader. But I have to say that my bootloader was acting weird from the start anyway. Whenever I used the command:
Code:
fastboot oem device-infoCode:
fastboot oem lockSo, after realising that my bootloader was not working correctly, and I could not install any recovery mod like CWM or TWRP (or any custom ROM for that matter), I found out that I needed to flash to the chip directly. This was also a huge challange, since i've never done this before and I actually did not know what I was doing. I've changed ROMS on phones a couple of times before, but that always was with a unlocked bootloader and so via the "normal" recovery system way.
For this part, I used XDA user: jacktackles' post a lot. He had some handy information about flashing to the chipset immediately and on what files to use. Since my B119 firmware was locked, I first wanted firmware with an unlocked bootloader. So I flashed some Chinese G750 firmware, that changed my device from a G750-U10 to a G750-T00. The flashing process was not flawless at all, and was the part that took me the most time (10+ hours). This all because I forgot to untick 1 simple box... Oh well, I guess that is how it works (at least I got it to work :D). So, after flashing this Chinese firmware, the hardest part was done. And I had access to TWRP Recovery. With this I installed the custom ROM that I wanted, and that is where my adventure ended.
So, to summarize: It is not easy, and not beginner friendly. That is why I wanted to make this post: To make it easier for you guys to do the same and get to catch YOUR Pokémon! (Or just to upgrade to 4.4.2). So let's now go to the tutorial part!
Tutorial part
I did this with a Windows 10 64-bit computer, although I would recommend using Windows 7. You will also need a usb-cable to connect your phone to your computer. Make sure that everytime you install a new ROM that you re-enable USB-debugging. You do this by going to your phone options > About Phone > Click "build number" 7 times > Go back to options > Developers options and tick the USB-Debugging tickbox.
Sorry for not uploading screenshots, but XDA prevents me from using any outside links because I'm a new user (so i'll try to be as precise as possible). This means that also any downloadable files should be retrieved from jacktackles' post (again big thanks to him!). His forum post can be found here: http://forum.xda-developers.com/andr...4-4-2-t3038166.
So, go to his post and download the VCOM drivers, MKT Droid Tools, B113 4.2.2 base with unlocked bootloader, Root Genius, and this ROM from another XDA-Developer: http://forum.xda-developers.com/show...9#post62356379 (Thanks a lot mate! Awesome upload). The Gaaps link is not needed with my method, and the last link is down. So you will need to get a replacement ROM for that. I used one from NeedRom. Just go to their site, and search for G750-U10 and download a ROM that you want (which is Android 4.4.2 of course). Or download another rom from any other site. The one I used is called: G750-U10 KitKat which was listed on the site on: 07/22/2015 11:35 pm. But you can also choose to download another ROM.
So to sum up, we got 3 ROMS:
1. The Chinese Firmware downgrade to B113
(FILENAME: G750-U10 V100R001C00B113CUSTC432D001_Firmware_Slovakia_Aust ria_Lithuania_Czech Republic_Latvia_Estonia_Greece_05021NHU)
2. The ROM from pavel22 to change the device to G750-T00
(FILENAME: G750-T00_mod8_265_FlashTool)
3. The ROM that we finally are after
(FILENAME: Huawei G750 U10 Kit Kat 4.9.16)
(In my case of course, not if you downloaded another "final" ROM)
Okay, so after all the files are downloaded and extracted (except for the 3rd ROM), we can start!
1. Rooting
This step is very simple and quick. Plug in your phone to your PC and open Root Genius. Click the big button and your phone should be rooted. If it gives an error, just try again and again until it works. After this restart your phone, and a new app "RootKing" should be installed. If not, the phone is not rooted.
2. MTK Droid Tools (backing up NVRam & IMEI)
Extract MTK Droid Tools from it's ZIP file, and place it in a folder. Now extract the VCOM drivers and install them. These drivers make MTK Droid Tools recognize your device. After installing the drivers, open up the .exe file from MTK and make sure it recognizes your device. If it does not, reboot your PC and try again. After your device is recognized, install the "adbd insecure" app on your device, from the playstore (or download it somewhere else if you do not want to pay). But trust me, it is worth the money. Once adbd is installed, tick both boxes on the app, so that we can connect to your phone with MTK. If done correctly, MTK Droid Tools should now be able to fully get access to your device, and a green box will appear in the left bottom of the program.
Now, backup your NVRam and IMEI. You do this by clicking on the "IMEI/NVRAM" button, and clicking backup. To be safe and for ease of access, write down your IMEI's on a paper or notepad file. Now the real fun starts!
3. Flashing the Chinese Firmware
In the Chinese firmware folder, there will be 4 sub-folders: SD_Upgrade, Update Tool, USB_DRV, USB_Upgrade.
0. Delete the SD_Upgrade folder (Not needed).
1. Go to USB_DRV and install the .exe file in the: "Driver For servers 2012-11-27" rar file.
2. After this open the Update Tool folder and extract files.
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests :P)
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file.
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
4. Flashing the: "G750-U10 to G750-T00" Firmware
This will be almost the same as part 3.
Extract the "G750-T00_mod8_265_FlashTool" rar file, and:
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests :P)
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file (make sure that you select the scatter file from the new rar file, and that you are not using the same one as before).
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
5. Restoring your NVRam and IMEI
You might need to root your device again, check if need be, by searching for an app called SuperSU or RootKing. If they are not present, root the device again with Root Genius.
You will need to re-install the "adbd" app on your new ROM. If there is no Play Store present, search for a Play Store APK on Google. Once, installed check the 2 tickboxes and re-open MTK Droid Tools.
Click on the "IMEI/NVRAM" button restore your backed-up NVRAM and retype you IMEI codes. Once the restores are done, restart the phone and check if you can call someone. If it works, good job! You can now progress to the very last step! If not, check if you entered the IMEI correct. You probably made a Typo.
6. Installing final ROM
Now that you have installed pavel22's ROM, you have access to a recovery system. So copy the whole 3rd zip file to the root folder of you device. Turn off your device, and turn it on again but this time while holding both volume buttons and the power button until TWRP opens. Click on install, search your zip file and swipe right. When it finishes, do a factory reset from TWRP and then reboot the system normally. You should now have a fully working G750-U10 with Android 4.4.2. Congratulations!
This was my tutorial and personal experience with converting my G750-U10 to Android 4.4.2. It has been a wild ride, and i've reached points that I wanted to throw my device against the wall. I'm now very happy with my (feeling like) new device. I can now finally catch 'em all and become the best PokéMaster ever!
~ NeusAap.
No comments:
Post a Comment