**You can begin the following process from any Build but you must already have Root Access**
**Required** [root] FlashFire
Download:
- G930T_PG1_Stock_DeOdexed_Debloated_ROM.zip
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app, grant root access, and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Flash Zip or OTA" and locate and select the ROM. Use the default settings under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set "Reboot" set to "Download."
6. Press the lightning bolt then "Ok" to begin the flash . The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition.
7. Once the flash is complete and the device reboots into "Download" mode, flash the G930T_PG1_Stock_Modem_Recovery_Bootloader.tar.md5 using Odin's PDA/AP slot. The device will take 10 - 15 mins for the first boot!
8. To regain root access, re-run "root.bat" once the device has fully rebooted. Make certain usb debugging is enabled. Enjoy!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The above process will update your Modem, Non-hlos, System, Bootloader, and Stock Recovery.
3. The ROM will automatically wipe all User Data!
4. Follow this guide if you do not already have root access: http://forum.xda-developers.com/att-...g935a-t3410538
**Required** [root] FlashFire
Download:
- G930T_PG1_Stock_DeOdexed_Debloated_ROM.zip
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app, grant root access, and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Flash Zip or OTA" and locate and select the ROM. Use the default settings under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set "Reboot" set to "Download."
6. Press the lightning bolt then "Ok" to begin the flash . The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition.
7. Once the flash is complete and the device reboots into "Download" mode, flash the G930T_PG1_Stock_Modem_Recovery_Bootloader.tar.md5 using Odin's PDA/AP slot. The device will take 10 - 15 mins for the first boot!
8. To regain root access, re-run "root.bat" once the device has fully rebooted. Make certain usb debugging is enabled. Enjoy!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The above process will update your Modem, Non-hlos, System, Bootloader, and Stock Recovery.
3. The ROM will automatically wipe all User Data!
4. Follow this guide if you do not already have root access: http://forum.xda-developers.com/att-...g935a-t3410538
No comments:
Post a Comment